Riso ComColor X1 series Technical Manual page 416

7. If the USB memory stick contains the correct machine fi rmware version, proceed with the fi rmware
installation.
8. If the USB memory stick does not contain the correct machine fi rmware, press the RESET Key to cancel the
fi rmware downloading.
Press the Power button on the machine operation panel and turn OFF the machine.
Remove the USB memory stick from the machine.
Insert USB memory stick, with the correct SNALL machine program fi rmware package, on the machine and
install the machine fi rmware.
CAUTION:
At any time until the correct machine fi rmware installation is completed, do not perform any operation on the machine,
such as test mode mechanical operation, normal printing operation, etc.
[ 14-65 ]
Electronic Components
Rev.1.00