Riso ComColor X1 series Technical Manual page 283

3 Lock the Plate spring firmly against the Print head.
The sketch does not show the Print head, but in actuality
there is a Print head against the Head adjust jig.
4 Tighten the two mounting screws of the Head adjust jig.
Print head
Head adjust jig
2
1
To hook the Plate spring:
1 Hook the Plate spring at the top
of the Head adjust jig.
2 Push the Plate spring down firmly
to lock.
Confirm before locking the Plate spring that the Plate
spring is applying tension on the Print head and it
does not clatter against the Print head.
(Rear)
[ 11A-71 ]
Ink Flow Section
The two screws to tighten
ComColor Series (Revision 2.4)