Disassembly; Vertical Paper Feed Unit A - Riso ComColor X1 series Technical Manual

2. Disassembly

2-1. Vertical Paper Feed Unit A

Vertical paper feed unit A
1. Turn OFF the machine power and disconnect the power cable from the power source.
2. Remove the center inner cover. (Refer to Chapter 2.)
3. Remove the left inner cover. (Refer to Chapter 2.)
4. Remove the rear cover center assembly. (Refer to Chapter 2.)
5. Put the power supply unit in maintenance position. (Pan-head screw 4x8 (2 pcs))
6. Remove the belt.
7. Take the wire harness out of the wire saddle.
Timing belt
Reuse band
8. Remove the reuse band.
9. Remove the connector.
10. Remove Vertical paper feed unit A from the front. (IT3C screw 4x8 (2 pcs))
< Vertical Paper Feed Unit A >
[ 6-11 ]
Registration Section
ComColor Series (Revision 2.4)