Riso ComColor FT Series User Manual
  1. Manuals
  2. Brands
  3. Riso Manuals
  4. Printer
  5. ComColor FT Series
  6. User manual

Riso ComColor FT Series User Manual

Hide thumbs Also See for ComColor FT Series:
Table of Contents

Advertisement

Quick Links

Download this manual
This guide describes total operation features
and specifications.
User's Guide
067-36006

Advertisement

Table of Contents
loading

Related Manuals for Riso ComColor FT Series

Summary of Contents for Riso ComColor FT Series

  • Page 1 This guide describes total operation features and specifications. User's Guide 067-36006...
  • Page 2 ComColor FT Series Model: 67A01/67A03/67A04/67A05/67A06/67A07 This Product Contains RFID (Radio Frequency Identification) System Model: 050-34901 Contains FCC ID: RPARFR6 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 3: About This Guide

    This guide describes the actions to take when a paper jam or other problem occurs. About This Guide This guide may not be reproduced in whole or in part without the permission of RISO KAGAKU CORPORATION. The contents of this manual may be changed without prior notice due to product improvements.

  • Page 4: Symbols, Notations, And Screenshots Used In This Guide

    This guide also assumes that each function is set to the factory setting, and that [Login Setting] is set to [ON]. The screenshots and illustrations in this guide may vary depending on the machine model and usage environment, including the connected optional equipment. ComColor FT Series User's Guide...

  • Page 5: For Comcolor Ft2430 And Comcolor Black Ft1430/Ft1430R Users

    [Color Mode], [Page Border], [Image Quality], or [Gamma Correction] for [System Info] screen the copy function  Printer Driver [Color Mode] in the [Basic] tab [Original Type], [Image Quality], [Screening], or [Gamma Correction] in the [Image] tab ComColor FT Series User's Guide...
  • Page 6 Original Printed result • To ensure that the printed colors are consistent with those of the original, it is recommended that you create the original in black and red before printing. ComColor FT Series User's Guide...

  • Page 7: Functions Made Possible By Installing Optional Equipment

    Printing PDF files saved on USB flash drive PostScript kit Printing from Mac OS PostScript kit Printing from tablet or smartphone using RISO PRINT- PostScript kit S application PS Kit FG10 is not supported in some regions. ComColor FT Series User's Guide...

  • Page 8: What You Can Do With This Machine

    This eliminates the multiple sheets of paper for printing. need to configure the same settings each time. You can create a large printout as a poster by sticking the printed sheets of paper together. ComColor FT Series User's Guide...

  • Page 9: Save Your Frequently Printed Documents On The Printer

    Check the machine's status and settings from your The machine automatically recognizes the size of computer, and perform job operations without originals when copying and scanning, even when having to actually go to the machine. you load originals of various sizes. ComColor FT Series User's Guide...

  • Page 10: Table Of Contents

    Printable Area Printing Paper Printouts Materials Not to Be Printed Ink Cartridge Storage and Handling Precautions Disposing of Used Ink Cartridges and Cleaning Tanks Part Names and Functions Main Unit and Optional Scanner Operation Panel ComColor FT Series User's Guide...
  • Page 11 Scanning Level Print Density ADF Scan & Pause Mixed Size Original Book Shadow Erasure Page Split Combine Image Repeat Booklet Stamp Page Border Image Quality Original Type Gamma Correction Image Control Base Color Level Image Position ComColor FT Series User's Guide...
  • Page 12 Duplex / Simplex Scanning Level Original Orientation Resolution Mixed Size Original Book Shadow Erasure Page Split PIN Code Original Type Gamma Correction Image Control Base Color Level Scan Job Build Scan Mode Function Buttons Favorites ComColor FT Series User's Guide...
  • Page 13 Printing a Document Saved on a USB Flash Drive List of Settings in [USB] - [Save] List of Settings in [USB] - [Load] USB Mode Function Buttons Function Buttons in [USB] - [Save] Function Buttons in [USB] - [Load] ComColor FT Series User's Guide...
  • Page 14 Printing Barcode Originals Chapter 8 Optional Equipment Face Down Finisher Caution Label List of Settings Printer Driver Settings Copy Mode Settings Additional Tray Loading the paper Multifunction Finisher Caution Label List of Settings Printer Driver Settings ComColor FT Series User's Guide...
  • Page 15 [Advanced] Tab [Environment] Tab RISO Console Settings Printable Files in the USB Flash Drive Font List Printing From Your Tablet or Smartphone Chapter 9 Appendix About Ink Cartridges Ink Cartridge Replacement Specifications Consumables Ink cartridges Index ComColor FT Series User's Guide...

  • Page 16: Safety Precautions

    If the ventilation openings are blocked, the inside of the machine may become hot and a fire might occur.  Do not place the machine in a dusty or humid location. Otherwise, a fire or an electric shock might occur. ComColor FT Series User's Guide...

  • Page 17: Power Connection

    When using the IC card reader The IC card reader continually emits a weak signal. If you are using a cardiac pacemaker and notice any abnormalities, immediately move away from the machine. Consult a physician immediately. ComColor FT Series User's Guide...

  • Page 18: Ink Cartridge

    Caution! Hot surface Since the parts near the high temperature caution label may be heated and cause burns, do not touch the parts directly with your fingers. ComColor FT Series User's Guide...

  • Page 19: Before Use

    Temperature range: 15°C to 30°C (59°F to 86°F) windows (if inevitable, use a curtain at the Humidity range: 40% to 70% RH (non- window) condensing) • Places subject to sudden temperature variations ComColor FT Series User's Guide...

  • Page 20: Power Connection

     Install the machine near an electrical outlet.  When the scanner is connected to the printer using the USB cable, the scanner is turned on and off by the power of the main unit. ComColor FT Series User's Guide...

  • Page 21: Connecting To A Computer

    You cannot directly connect the machine to a communication line offered by a telecommunication carrier (mobile communications company, fixed-line telecoms company, Internet provider, etc.). When connecting the machine to the network, make sure that the connection is made via a router etc. ComColor FT Series User's Guide...

  • Page 22: Required Spacing

    Units: mm (inch)  Main Unit with Optional Equipment Installed Provide sufficient space for opening the standard tray, the front cover, and the original cover of the scanner. • As seen from the front Units: mm (inch) ComColor FT Series User's Guide...
  • Page 23 Before Use • As seen from the side Units: mm (inch) ComColor FT Series User's Guide...
  • Page 24 (43 29/32") 1,260 mm Main unit and Scanner (when using special scanner stand) (49 5/8") Height 1,315 mm Main unit and Face Down Finisher (51 25/32") 1,215 mm Main unit and Multifunction Finisher (47 27/32") ComColor FT Series User's Guide...
  • Page 25 Main unit, Multifunction Finisher, and Folder Unit (52 3/16") Main unit, Scanner (when using special scanner stand), Multifunction Finisher, and 1,325 mm Folder Unit (52 3/16") 1,215 mm Main unit and Additional Tray (47 27/32") ComColor FT Series User's Guide...

  • Page 26: Handling

    To accurate scanning malfunctions. • When scanning photos or printed documents, make sure the surface of the original is flat. • We recommend that you use an original with a font size of at least 5pt. ComColor FT Series User's Guide...

  • Page 27: Printable Area

    DLR: 110 mm × 220 mm (4 5/16" × 8 21/32") Height up to 56 mm (2 3/16") in Maximum Load • Envelope: 229 mm × 305 mm (9" × 12") each tray • Envelope: 254 mm × 331 mm (10" × 13") ComColor FT Series User's Guide...
  • Page 28 432 mm (3 9/16" × 5 27/32" -  Store paper flat, away from high Auto-control 12 19/32" × 17") temperatures, high humidity, and direct stacking tray (When using paper exceeding sunlight. 432 mm (17") , close the paper guides.) ComColor FT Series User's Guide...

  • Page 29: Printouts

    However, they will evaporate and disappear over time. ComColor FT Series User's Guide...

  • Page 30: Ink Cartridge Storage And Handling Precautions

    Do not add ink into the ink cartridge.  The ink in the cleaning tank cannot be used for printing.  Remove the ink cartridge from its plastic bag just before inserting it into the machine. ComColor FT Series User's Guide...

  • Page 31: Part Names And Functions

    Blue LED ON: Ready Standard tray • Blue LED flashing: Machine is starting up or Load special paper (thick paper, envelopes, etc.) scanning here. You can also load plain paper. • Red LED flashing: Error has occurred ComColor FT Series User's Guide...
  • Page 32 Upper Right Cover Open this cover when there is a paper jam. Paper Alignment Lever Use this lever to align the documents that are output. If the lever interferes with output, pull it up and lock it. ComColor FT Series User's Guide...

  • Page 33: Operation Panel

    Reset Key Press this key to return the settings to their default values. • Only the settings for the selected mode are reset. The settings for other modes remain unchanged by this operation. ComColor FT Series User's Guide...
  • Page 34 This key lights up when this machine is in power saving mode. Pressing this key when it is lit makes the machine ready for operation. • Pressing this key when it is not lit makes the machine go into sleep mode. ComColor FT Series User's Guide...

  • Page 35: Touch Panel

    Offline This icon is displayed when [Online/Offline] is set to [OFF]. FORCEJET™ Link Icon This icon indicates whether all parts required for printing are working correctly. For more information, see the separately provided "Troubleshooting Guide". ComColor FT Series User's Guide...

  • Page 36: Mode Screens

    The current page and total number of setting button pages are displayed as a fraction. Use these buttons to enter [Destination] and [Document Name] as well as to set up scanner functions. Touch [More Menu] to display other setting buttons. ComColor FT Series User's Guide...
  • Page 37 You can save the scanned data to the internal job. hard disk of this machine. The saved data can View Selection Buttons be downloaded from the RISO console. You can select whether to view the waiting jobs as thumbnails or as a list. •...
  • Page 38 You can change the color and name of a folder. View Selection Buttons You can select whether to view folders as icons or as a list. • : View as icons • : View as list ComColor FT Series User's Guide...
  • Page 39 • If the available space on the internal hard disk is low, delete unnecessary documents in the folder to increase available space. • You can save up to 1,000 files in one folder. ComColor FT Series User's Guide...
  • Page 40 Use these buttons to set up USB Save functions. Touch [More Menu] to display other setting buttons. [Document Name] Button Press this button to open the [Document Name Setting] screen. Use this button to name a document. ComColor FT Series User's Guide...
  • Page 41 Enter or check the number of copies to print. The name of the selected document is displayed Folder Name here. The name of the selected folder or the folder where the document is saved is displayed here. ComColor FT Series User's Guide...
  • Page 42 [Information Print] Button Touch this button to print the system information or a sample image. [Status / Options] Button Touch this button to display information on the connected optional equipment and its status. ComColor FT Series User's Guide...

  • Page 43: Touch Panel

    [External System Link] function, conditions are met. Contact your administrator for contact your dealer or authorized service details. representative.  License Info Screen This screen displays the license information of the system used with this product. ComColor FT Series User's Guide...
  • Page 44 • The current selected area is indicated by a flashing short line under numbers or letters. To switch the area, touch the area that you want to enter text in. ComColor FT Series User's Guide...

  • Page 45: Preparation

    When using the feed tray, you do not need to set the standard tray. the operation panel. • With the RISO console, you can check the status of the machine on your computer. (p.146 "Overview of the RISO Console") Check that the [Power] key is off, then turn off the main power switch.

  • Page 46: Login

    Input your password and touch [Login]. Follow the displayed instructions for operation. • When logging in for the first time, change the temporary password to your own password. When you are successfully logged in, the [Home] screen appears again. ComColor FT Series User's Guide...

  • Page 47: Loading Paper

    Pull a tray out, toward the front. Move the paper feed guide and stopper against the edge of the paper. Hold the lever of the paper feed guide, and pull it forward to spread the paper feed guide until it stops. ComColor FT Series User's Guide...
  • Page 48 On the operation panel, check the tray settings. When you have switched to a different type or size of paper, update the feed tray settings. (p.59 "Paper Selection") Load the paper. Load paper with the printing side face up. ComColor FT Series User's Guide...
  • Page 49 • Do not place spare paper on the paper size detection sensor when loading A4, Letter, or A5 size paper. If the sensor is blocked, the machine cannot detect the paper size correctly. ComColor FT Series User's Guide...

  • Page 50: Closing The Standard Tray

    Make sure the standard tray is all the way down before closing it. Load additional paper, or switch the loaded paper. Closing the Standard Tray • Make sure that the power is on when you perform this operation. ComColor FT Series User's Guide...

  • Page 51: Installing The Printer Driver

    • Keep the DVD-ROM in a safe place for future reference. Select the series of your printer in the pull-down menu and click [OK]. Select the desired language in the pull-down menu and click [OK]. ComColor FT Series User's Guide...

  • Page 52: About Jobs

    To cancel a job, select the job that you want to cancel and either touch [Cancel] or press the [Stop] key. To cancel a job with a PIN code, you need to enter the PIN code. ComColor FT Series User's Guide...

  • Page 53: [Finished] Screen

    Touch the sub menu to check the details of a job, print the job again, or delete the job. • Touch [Filtering] to set the types of completed jobs to be listed. • Touch to switch the pages in the list. ComColor FT Series User's Guide...
  • Page 54 ComColor FT Series User's Guide...

  • Page 55: Chapter 1 Copying

    Specify the number of copies using the numeric keys. Press the [Start] key. Copy Settings p.59 This section explains each copy setting in detail. Copy Mode Function Buttons p.78 This section explains the functions available in Copy mode. ComColor FT Series User's Guide...

  • Page 56: Overview Of Copy Operations

    Touch [Copy] on the [Home] screen. Slide the original guides to match the width of the originals. Change the settings. Specify the copy finishing settings. For more information on the functions that can be configured, see "List of Settings" (p.57). ComColor FT Series User's Guide...
  • Page 57 Load the next original and press the [Start] key. A message appears, and the original is copied as the next job. Change the settings. You can change the following settings. • Slow Printing (p.76 "Slow Printing") ComColor FT Series User's Guide...
  • Page 58 When this setting is set to [OFF], the machine will not receive jobs from network devices such as computers. This option is convenient when you want to use the machine exclusively without being interrupted by other job. ComColor FT Series User's Guide...

  • Page 59: List Of Settings

    You can quickly print exactly the number of copies of the number p.72 of sets you need. Add Cover Specify this to add front and back covers to the front and back of the printout. p.74 ComColor FT Series User's Guide...
  • Page 60 Use this option to check the printing result when making a large number of copies; Sample Copy p.78 the machine stops after printing one copy. Check Setting Use this option to check the current settings. p.79 Custom Menu Register favorites and default settings, and edit the button order. p.79 ComColor FT Series User's Guide...

  • Page 61: Copy Settings

    Select the color mode. Paper tray selection When using a paper size that is different from the Touch [OK]. original size, or to use a tray with [Auto Selection] not set to [ON], select a paper tray. ComColor FT Series User's Guide...
  • Page 62 [OFF]. paper sizes registered by the administrator in advance. [Auto Selection] Set this option to [ON] to make a paper tray [Manual] available for automatic selection. Specify the non-standard paper size that is not registered. ComColor FT Series User's Guide...

  • Page 63: Scanning Size

    ADF (so that the text of the original is changes.) If the printing result is not what you sideways). expected, change the paper type. ComColor FT Series User's Guide...

  • Page 64: Duplex/Simplex

    [Top Side Up] or [Top Side Left]. color or originals printed on colored paper. (p.70 "Base Color Level") Touch [Simplex -> Duplex]. Specify the paging direction. Touch [OK]. ComColor FT Series User's Guide...

  • Page 65: Print Density

    The current status is displayed on the screen. The [Mixed Size Original] screen is displayed. When there are no sheets of the original in the ADF, the original add confirmation screen is displayed. Touch [ON]. Touch [OK]. ComColor FT Series User's Guide...

  • Page 66: Book Shadow Erasure

    Select the erasure width. Set [Page Split]. For more information, see "Page Split" (p.64). Touch [OK]. How to set up a page split is explained below using an example of setting [Page Selection while Scanning] to [ON]. ComColor FT Series User's Guide...

  • Page 67: Combine

    The [Combine] screen is displayed. • If the [Confirm] screen appears, set the original orientation to [Top Side Up] or [Top Side Left]. Specify the number of pages per sheet. Select a layout. Touch [OK]. ComColor FT Series User's Guide...

  • Page 68: Image Repeat

    When using this function with [Booklet], the page number and [Layout Order] date are stamped on each booklet page. Specify the imposition order. • Specifying the reproduction size does not affect the stamp size. ComColor FT Series User's Guide...
  • Page 69 Specify the text to be printed. Specify the text size. Touch [ ] or [ ] to specify the text size on the [Text Size] screen. You can also enter the number using the numeric keys. Set the transparency option. ComColor FT Series User's Guide...

  • Page 70: Page Border

    Set the text to be stamped. Touch [Image Quality]. Touch [OK]. The [Image Quality] screen is displayed. Select a resolution. Page Border Touch [OK]. This option adds a border line in the margins of the paper. ComColor FT Series User's Guide...

  • Page 71: Original Type

    [1], [2], [3], [4], [5], [6], [7] [Magenta], the gamma value can only be The higher the value (highest being [7]), the adjusted for black (K). (p.59 "Color Mode") greater the edge emphasis is for parts recognized as text. ComColor FT Series User's Guide...

  • Page 72: Base Color Level

    (front or back side) to 0 mm. [Repetition] ], [ ], [ ], [ Specify whether to use the target page of the Use these keys to move the position of images. image file repeatedly. ComColor FT Series User's Guide...
  • Page 73 [All pages]: Use the all pages as overlay image. Overlap in order from front to back to the original. [First Page]: Use only the first page as overlay image. • Any page other than the first page cannot be specified. ComColor FT Series User's Guide...

  • Page 74: Program

    To print one set of copies specified, enter 1 in You can register up to 12 programs and call them [Sets]. whenever necessary. Settings on the operation panel Class Touch [Program]. Group Copies [Sets] The [Program] screen is displayed. ComColor FT Series User's Guide...

  • Page 75: When Using The Optional Face Down Finisher

    Touch [Program]. when using the optional face down The [Program] screen is displayed. finisher (p.172 "Offset Output ([Program])") when using the optional multifunction finisher (p.190 "Offset Output ([Program])") Touch [OK]. The [Confirm] screen is displayed. ComColor FT Series User's Guide...

  • Page 76: Add Cover

    When this option is set to [Between Sorts], a slip sheet is inserted for each unit specified in [Sort]. Select the binding side. When this option is set to [After a Job], a slip sheet is inserted after every printed job. ComColor FT Series User's Guide...

  • Page 77: Binding Margin

    If you are using the optional face down finisher (p.186 "Staple / Punch") or multifunction finisher, the [Offset Output] function is available. For more information, see the following pages: when using the optional face down finisher (p.171 "Offset Output ([Separation])") ComColor FT Series User's Guide...

  • Page 78: Fold

    (p.189 "Output Tray") This option is convenient when the originals vary in • when using the optional stacking tray (p.194 type and image quality. "Face Up/Down") [OFF], [ON] ComColor FT Series User's Guide...

  • Page 79: Interrupt Copy

    Touch [Scanned] on the [Confirm] screen. The scanned data is printed. Interrupt Copy This function allows you to pause the job being printed to copy another document. • The following functions are not available for interrupt copy. ComColor FT Series User's Guide...

  • Page 80: Copy Mode Function Buttons

    (p.62 "Sort") Touch [OK]. Touch [Sample Copy]. • You cannot rename or delete favorites that are registered as factory settings. The [Sample Copy] screen is displayed. Touch [ON]. Touch [OK]. ComColor FT Series User's Guide...

  • Page 81: Check Setting

    Register the settings and the number of copies for The [Edit Favorites] screen is displayed. a setting button as a favorite. You can register up to 30 favorites. Touch [Custom Menu]. The [Custom Menu] screen is displayed. ComColor FT Series User's Guide...
  • Page 82 In this case, the favorites registered by the administrator and the Touch [Clear]. favorites registered as factory settings are displayed. The [Initialize] screen is displayed. Touch [OK]. Touch [OK]. The default values are cleared. Touch [Close]. ComColor FT Series User's Guide...
  • Page 83 Touch [Edit Button Order]. The [Edit Button Order] screen is displayed. Select one of the setting buttons. Touch [Up] or [Down] to set up the order. Touch [OK]. The arrangement of the setting buttons is completed. Touch [Close]. ComColor FT Series User's Guide...
  • Page 84 ComColor FT Series User's Guide...

  • Page 85: Chapter 2 Scanning

    Select an address or destination. Change the settings. Check the preview display. Touch [Send]. Scan Settings p.88 This section explains each scan setting in detail. Scan Mode Function Buttons p.92 This section explains the functions available in Scan mode. ComColor FT Series User's Guide...

  • Page 86: Overview Of Scan Operations

    Touch [Scan] on the [Home] screen. Select [Mail], [PC], or [Console]. Slide the original guides to match the width of the originals. Select an Address/Destination. If you select [Mail] or [PC], specify the address/destination for the scanned data. ComColor FT Series User's Guide...
  • Page 87 Touch [Sender] to display the [Sender] screen and enter the sender's name. When you have selected [PC]  The scanned data is saved on a computer on the network. Touch [Destination]. The [Destination] screen is displayed. ComColor FT Series User's Guide...
  • Page 88 The saved data can be downloaded to a user's computer using the RISO Console. See "[Scan] Menu Screen" (p.152) in "RISO Console". • The storage period for the scanned data is configured by the administrator.

  • Page 89: List Of Settings

    Use this option to check the current settings. You can check the preview of the Check Setting p.92 scanned data. Register favorites and default settings, and edit the button order. You can register and Custom Menu p.92 edit the address books as well. ComColor FT Series User's Guide...

  • Page 90: Scan Settings

    [Add Owner Name] [Full Color] Specify whether to add the owner's name to the Originals are converted to RGB data and saved. document names set up in [Input Method]. ComColor FT Series User's Guide...

  • Page 91: Scanning Size

    [Details]. [Paging Direction] Specify whether pages are opened right/left or [Single Page] top/bottom. Select [ON] to save the scanned data in single [Original Orientation] (p.90 "Original Orientation") pages. Touch [Duplex/Simplex]. The [Duplex/Simplex] screen is displayed. ComColor FT Series User's Guide...

  • Page 92: Scanning Level

    Original Orientation Assign PIN codes when saving scanned jobs on the internal hard disk of this machine. The PIN code set here is required when using the RISO Specify the orientation of the original. Console to download to a computer.

  • Page 93: Gamma Correction

    The scanned data is saved as one document file. Scan Job Build You can scan multiple originals with different settings and combine the jobs into a one job. The scanned data is saved as one document file. [OFF], [ON] ComColor FT Series User's Guide...

  • Page 94: Scan Mode Function Buttons

    Adding to the Address Book You can register addresses and destinations in address books. When you have selected [Mail]  Touch [Custom Menu]. The [Custom Menu] screen is displayed. The following settings can be configured from the sub menu. ComColor FT Series User's Guide...
  • Page 95 Change the settings registered as a scanned data destination. Specify whether to show a common recipient or an For more information, see "Scan Data Directory" in individual recipient on the address book. the separately provided "Administrator's Guide". Touch [Close]. ComColor FT Series User's Guide...
  • Page 96 For more information, see "Saving as a Default" (p.80) and "Clearing Defaults" (p.80) in "Copying". • The following settings are not registered as default settings. [Document Name], [PDF Password] in [File Format], [PIN code] ComColor FT Series User's Guide...

  • Page 97: Chapter 3 Printing

    Press the [Start] key. Click [Print] or [OK]. Printer Driver Settings p.103 This section explains each printer driver setting in detail. Print Mode Function Buttons p.124 This section explains the functions available in Print mode. ComColor FT Series User's Guide...

  • Page 98: Overview Of Print Operations

    The print dialog box is displayed. • If the [Collate] check box in the print dialog box is selected, remove the check mark. To print by collating copies, set [Sort] in the [Basic] tab to [Collated]. ComColor FT Series User's Guide...
  • Page 99 The [Maintenance] screen is displayed. Changing Settings During Change Settings. Printing You can change the following settings. • Head Cleaning • Paper Guide Control Press the [Stop] key. • Online/Offline The [Suspending] screen is displayed. • Front Cover Release ComColor FT Series User's Guide...
  • Page 100 [Paper Guide Control]. For more information, see the separately provided "Troubleshooting Guide". Touch [Close]. Touch [Continue]. Printing of the job with modified settings starts. ComColor FT Series User's Guide...

  • Page 101: Printer Driver Screen

    If the values are not registered, all the settings are restored to their default values. (p.103 "Restore user settings") • When optional equipment is connected, first configure the settings in [Printer Configuration] under the [Environment] tab to use certain functions. The unavailable functions are grayed out. (p.121 "[Environment] Tab") ComColor FT Series User's Guide...

  • Page 102: List Of Settings

    Specify the background watermark to be added to document pages. p.111 Stamp Use this option to stamp the page number and date in the header or footer. p.112 Image Position Specify this when adjusting the print position. p.112 Rotation Specify the print orientation. p.112 ComColor FT Series User's Guide...
  • Page 103 Select this when setting a desired job name. p.119 PIN Code Use this option to add a PIN code to data. p.119 Job Comment Use this option to add a comment to a job. p.119 ComColor FT Series User's Guide...
  • Page 104 It appears when [External System Link] is set up by the administrator. You can print or p.124 delete jobs, or check amounts. Details Use this option to check the current settings. p.124 Change Setting Use this option to change job settings. p.125 ComColor FT Series User's Guide...

  • Page 105: Printer Driver Settings

    [Preferences] are temporary settings, Click [Add to Favorites]. which are specified by selecting the print option in the application on the computer. The [Add to Favorites] dialog box is displayed. The settings are not saved. ComColor FT Series User's Guide...

  • Page 106: [Basic] Tab

    When program has been configured, you regardless of the colors used in the document. cannot enter the number of copies. [Magenta] Select this option to print in one color (magenta) regardless of the colors used in the document. ComColor FT Series User's Guide...
  • Page 107 When using this function with duplex printing, you can set the binding position for each paper size. Select the [Mixed Size Original] check box and click [Details] to display the [Mixed Size Original] dialog box. Select the binding position for each size. ComColor FT Series User's Guide...
  • Page 108 Select [Any] in [Original Size] and [Paper Size] settings. [Paper Type]. (p.106 "Paper Type") • You can use the RISO Console to confirm the paper size and paper type loaded in the printer Paper Size paper tray. See "[Consumables] Screen"...
  • Page 109 This type This method is called "color management", and the of file can only be opened on a RISO printer or application. conversion table is called a "color profile".

  • Page 110: [Favorites] Tab

    [Current Setting] The selected settings are saved. The selected favorite settings are displayed. [List] The registered favorites are displayed. [Up], [Down] You can change the display order for the favorites in [List] using these keys. ComColor FT Series User's Guide...

  • Page 111: [Layout] Tab

    Continuous multiple pages are imposed and Select the number of pages per sheet and the printed to create a middle-binding booklet after order that they are laid out. duplex printing. Example: If [4 Pages: Left Top to Bottom] is selected ComColor FT Series User's Guide...
  • Page 112 The image quality may be rough-grained when enlarging the image data. Be sure to select [Fine] for [Image Quality] and [High] for [Line Smoothing]. For more information, see "Image Quality" (p.115) and "Line Smoothing" (p.116). ComColor FT Series User's Guide...
  • Page 113 You can also print a character string of up to 63 vertical and horizontal directions. characters long, but you cannot register it; enter a character string each time. Click [Apply] to apply the entered character string to the preview image. ComColor FT Series User's Guide...
  • Page 114 Specify the page number text size. Specify the print orientation. Date  To stamp the date, select [ON] on the [Date] tab screen. [Top Left], [Top Center], [Top Right], [Bottom Left], [Bottom Center], [Bottom Right] Specify the print position. ComColor FT Series User's Guide...

  • Page 115: [Finishing] Tab

    (p.179 "Staple") Punch If you are using the optional multifunction finisher with the punch unit, you can configure holes to punch. For more information, see "Punch" (p.182) in "Optional Equipment". ComColor FT Series User's Guide...
  • Page 116 This option inserts a cover sheet after the last page. Slip Sheet Tray Selection  [Select Front Cover Tray], [Select Back Cover Tray] [Standard Tray], [Feed Tray 1], [Feed Tray 2], [Standard Tray], [Feed Tray 1], [Feed Tray 2], [Additional Tray] [Additional Tray] ComColor FT Series User's Guide...

  • Page 117: [Image] Tab

    Print Density Specify the print density. [-3] (light), [-2], [-1], [±0 (Standard)], [+1], [+2], [+3] (dark) Image Quality Specify the image resolution. [Standard (300x300 dpi)] Suitable for documents and other originals with text. ComColor FT Series User's Guide...
  • Page 118 The line smoothing function's image box. Enter a value between -25 and +25 for each processing is inversely proportional to item. processing speed (print speed). The higher the image quality, the lower the print speed. ComColor FT Series User's Guide...
  • Page 119 Software, how to specify the barcode area, and printed in the color specified in the [Color how to register the definition file in the printer, see Mode] setting. "Overview of the Barcode Area Definition Software" (p.158). ComColor FT Series User's Guide...

  • Page 120: [Advanced] Tab

    This will enable you to print barcodes without performing necessary settings each time, making barcode printing easy. How to Register to the Default  Right-click the FT series printer from [Devices and Printers] on the [Start] menu. ComColor FT Series User's Guide...
  • Page 121 Select the [PIN Code] check box and enter a PIN code. When [Hide Job Name] is selected, the job No. of name is displayed with asterisks (*) on the employees operation panel of the printer and on the RISO Necessary Console. number of copies •...

  • Page 122: Environment Settings

    When this check box is selected, numbers are stamped on the slip sheets. If [Between Sets] is selected, the group number and set number are stamped. If [Between Groups] is selected, the group number is stamped. ComColor FT Series User's Guide...

  • Page 123: [Environment] Tab

    1 to 32 characters as the community name for SNMP communication. • If a check is not placed in [SNMP Community Name], the community name for SNMP communication will be set to "public". ComColor FT Series User's Guide...
  • Page 124 Click [Get Printer Info]. Click [Save in File]. The information of the paper size registered in the printer is displayed. Specify the destination folder and Click [Close]. file name. The paper size information is saved. ComColor FT Series User's Guide...
  • Page 125 [Output] under the [Basic] tab on the printer driver screen. (p.107 "Output and Destination") • If folder information cannot be obtained from the printer, the shared folders are displayed as "Shared folder 1" to "Shared folder 30". ComColor FT Series User's Guide...

  • Page 126: Print Mode Function Buttons

    You can check the details of the selected document. Touch [Details]. The [Details] screen is displayed. Check the details of the selected document. The following settings can be configured from the sub menu. • Print This List ComColor FT Series User's Guide...

  • Page 127: Change Setting

    For more information, see "Image Position" (p.70) in "Copying". Slow Printing This option slows down the printing speed as well as reduces the operating sound of the job being processed. For more information, see "Slow Printing" (p.76) in "Copying". ComColor FT Series User's Guide...
  • Page 128 ComColor FT Series User's Guide...

  • Page 129: Chapter 4 Storage

    Select a document. data to. Enter the number of copies Press the [Start] key. using the numeric keys. Press the [Start] key. Storage Mode Function Buttons p.133 This section explains the functions available in Storage mode. ComColor FT Series User's Guide...

  • Page 130: Overview Of Storage Operations

    Align the originals and place them face up. Close the original cover. • Open and close the original cover gently. Select [Storage] - [Save] on the [Home] screen. Slide the original guides to match the width of the originals. ComColor FT Series User's Guide...

  • Page 131: Printing A Document In A Folder

    Press the [Start] key. • Documents saved in a folder are digitized along with their settings. When printing these documents, use the same paper type as that used when saving the data in the folder. ComColor FT Series User's Guide...

  • Page 132: List Of Settings In [Storage] - [Save]

    Specify the image processing of the original. p.69 Base Color Level Make the background color (base color) lighter so that the text is easier to read. p.70 Image Position Specify this when adjusting the print position. p.70 ComColor FT Series User's Guide...
  • Page 133 This function calls frequently used settings. p.133 Use this option to check the current settings. You can check the preview of the Check Setting p.133 scanned data. Custom Menu Register favorites and default settings, and edit the button order. p.134 ComColor FT Series User's Guide...

  • Page 134: List Of Settings In [Storage] - [Load]

    Specify the print density. p.63 Image Position Specify this when adjusting the print position. p.70 This option slows down the printing speed as well as reduces the operating sound of Slow Printing p.76 the job being processed. ComColor FT Series User's Guide...

  • Page 135: Storage Mode Function Buttons

    Check Setting  You can view the settings for the document to be saved. View Folder For more information, see "Check Setting" (p.92) in "Scanning". This function displays a list of documents in the selected folder. ComColor FT Series User's Guide...

  • Page 136: Function Buttons In [Storage] - [Load]

    Enter a text string that you want to • Select All / Deselect all search for and touch [OK]. • Delete • Change Setting • Copy to USB Drive (p.135) • Copy to Folder (p.135) ComColor FT Series User's Guide...
  • Page 137 If the USB flash drive does not have a folder when [OK] is touched, a folder is automatically generated to copy the document. • Select a folder and touch [Open] to display a list of all documents in that folder. ComColor FT Series User's Guide...
  • Page 138 ComColor FT Series User's Guide...

  • Page 139: Chapter 5 Usb

    Change the settings. Select a document. Press the [Start] key. Enter the number of copies using the numeric keys. Press the [Start] key. USB Mode Function Buttons p.142 This section explains the functions available in USB mode. ComColor FT Series User's Guide...

  • Page 140: Overview Of Usb Operations

    "Originals" (p.24). In the ADF  Load the original in the ADF. Close the original cover. Align the originals and place them face up. • Open and close the original cover gently. ComColor FT Series User's Guide...

  • Page 141: Printing A Document Saved On A Usb Flash Drive

    • A PRN file is a dedicated file format in which data is output via the printer driver. This type of file can only be opened on a RISO printer or application. • If you are using the optional PostScript kit, you can also use PDF files.

  • Page 142: List Of Settings In [Usb] - [Save]

    This function calls frequently used settings. p.142 Use this option to check the current settings. You can check the preview of the Check Setting p.142 scanned data. Custom Menu Register favorites and default settings, and edit the button order. p.142 ComColor FT Series User's Guide...

  • Page 143: List Of Settings In [Usb] - [Load]

    If the optional PostScript kit is installed, PDF files saved on a USB flash drive can also be used. In this case, you can change the settings for printing PDF files. For more information, see "Printable Files in the USB Flash Drive" (p.207) in "Optional Equipment". ComColor FT Series User's Guide...

  • Page 144: Usb Mode Function Buttons

    • Print This List When you select the document on the document list screen, the following settings can be configured from the sub menu. • Select All / Deselect all • Change Setting ComColor FT Series User's Guide...
  • Page 145 • Only the folders accessible to the logged- in user are displayed on the [Copy to Folder] screen. • Select a folder and touch [Open] to display a list of all documents in that folder. ComColor FT Series User's Guide...
  • Page 146 ComColor FT Series User's Guide...
  • Page 147 RISO Console The RISO Console is software that uses a Web browser to remotely control this machine. With a computer connected to the printer via a network, you can check the printer status, change the settings of a job, and perform other operations.

  • Page 148: Chapter 6 Riso Console

    The information and the functions that are • Make sure the machine is connected to the network. available on the side menu of the RISO Console are as listed below. System Info View the status of the consumables, such as Consumables p.149...

  • Page 149: Starting The Riso Console

    <Example of how to enter the IP address "192.0.2.99"> Press the [Enter] key. The [System Info] screen of the RISO Console is displayed. • You can create a shortcut on the desktop to quickly bring up the RISO Console.

  • Page 150: Common Button Operations

    ([Document Name], [Owner], [Pages], or [Date and Time Saved]). Select All Select this option if you want to select all jobs. Jobs To select a job, click the job name to add a check mark. ComColor FT Series User's Guide...

  • Page 151: [System Info] Menu

    • The remaining amount of ink is indicated based on the bottle capacity. • If you are not using RISO ink, the remaining amount of ink is not displayed. Paper Status Machine Status The estimated remaining amount of paper, paper...

  • Page 152: [User Info] Screen

    The charge count for each paper size division is printouts and copies made by the user logged in displayed separately for monochrome and color. are displayed. [Print This List] Click this to display the latest information. ComColor FT Series User's Guide...

  • Page 153: [License Info] Screen

    Click [OK]. The screen is displayed to indicate that the settings are sent. Click [OK]. [License Info] Screen The [License Info] screen displays information about the license of the system used in the machine. ComColor FT Series User's Guide...

  • Page 154: [Scan] Menu

    Click [Download]. The screen indicating that a zip file is being created is displayed. • For jobs with a PIN code, the PIN code input screen is displayed. Enter the PIN code and click [OK]. ComColor FT Series User's Guide...

  • Page 155: [Print] Menu

    When user login is not required • In the following cases, the job name is displayed as "*****". Jobs with the [Hide Job Name] check box selected on the printer driver (p.119 "PIN Code") ComColor FT Series User's Guide...

  • Page 156: [Storage] Menu

    The functions may not be available, depending on how the administrator has configured the settings. Managing Documents in a Folder [Close] Close the document list screen and display the [Load] screen. [Print] Print the selected documents. ComColor FT Series User's Guide...

  • Page 157: [Job Status] Menu

    Click this button to view the settings for the selected job. The displayed contents differ depending on the job type. [Finished] Screen The [Finished] screen displays finished print jobs, suspended print jobs, and print jobs with errors. ComColor FT Series User's Guide...

  • Page 158: [Maintenance] Menu

    When the printer is being used, cleaning of the print head is performed after the printer has finished printing or copying. Press [Head Cleaning]. Click [OK]. The screen is displayed to indicate that the settings are sent. Click [OK]. ComColor FT Series User's Guide...

  • Page 159: Chapter 7 Using The Barcode Area Definition Software

    Barcode Area Definition Software Creating and Registering a Barcode Area Definition File p.161 Create a PRN file. Read the PRN file. Specify the barcode area. Save the barcode area definition file. Register the barcode area definition file. ComColor FT Series User's Guide...

  • Page 160: Overview Of The Barcode Area Definition Software

    Open the [Utility] - [BarcodeAreaDefinitionSoftware] After the Barcode Area Definition folder on the DVD-ROM, and double- Software has been uninstalled, click the "setup.exe" file. restart the computer. Select the desired language in the pull-down menu and click [OK]. ComColor FT Series User's Guide...

  • Page 161: Starting The Barcode Area Definition Software

    When the same icon appears in both the tool Click [Start] - [All Apps] - [RISO] - bar and the menu bar, you can click either one to [Barcode Area Definition Software].
  • Page 162 Creation Tool suitable for reading. The enclosed area is indicated Automatically detects the Auto Area barcode area on all pages or Detection specified pages. More Version Displays the version information. ComColor FT Series User's Guide...

  • Page 163: Creating And Registering A Barcode Area Definition File

    Reading the PRN File Open the PRN file (print image) using the Barcode Click the [Basic] tab. Area Definition Software. Select [Save as a File] in the Click [Start] - [All Apps] - [RISO] - [Output] pull-down menu. [Barcode Area Definition Software]. •...
  • Page 164 (p.159 "Operations") If automatic barcode area detection was used, make sure that the barcode was detected properly. If the detected area is not aligned with the barcode, use (selection tool) to adjust the position. ComColor FT Series User's Guide...
  • Page 165 Base point Registering the Barcode Area Definition File Register the barcode area definition file to the printer in the administrator menu on the RISO Console. For more information, see the separately provided "Administrator's Guide". Example of when barcode processing is not...

  • Page 166: Repetition Function

    You can select a registered barcode area definition file from the [Barcode Area Definition] pull-down menu in the [Image] tab on the printer driver screen. Select a suitable barcode area definition file when printing a barcode original. (p.118 "Printing Barcode Originals") ComColor FT Series User's Guide...

  • Page 167: Chapter 8 Optional Equipment

    This section describes the settings and functions that are available when the auto-control stacking tray/wide stacking tray is connected. PostScript kit p.195 This section describes the settings and functions that are available when the PostScript kit is installed. ComColor FT Series User's Guide...

  • Page 168: Face Down Finisher

    Open this cover if a staple is jammed, or to replace the staple cartridge. Face Down Finisher Socket Position [ ] and [ Connect the face down finisher power cord. Align [ ] and [ apart from each other. ComColor FT Series User's Guide...

  • Page 169: Caution Label

    Location of the Caution Label  The location of the caution label (warning) is shown below. Label Details  Your fingers may become caught while the face down finisher moves or when you remove printouts from the stacking tray. ComColor FT Series User's Guide...

  • Page 170: List Of Settings

    • The orientation of the paper varies depending Output slightly apart from one p.171 on the binding edge. See "Staple Function and (Program) another to create Loading Orientation of the Paper" (p.170) separation. ComColor FT Series User's Guide...
  • Page 171 When the printing job exceeds the maximum A3 (Ledger) A4 (Letter) B4 (Legal) number of sheets that can be stapled, a confirmation screen is displayed so that you can select whether to stop printing or continue printing without stapling. ComColor FT Series User's Guide...
  • Page 172 For [1 Staple] binding, the staple angle may differ from the images above and the print images on the printer driver screen, depending on the paper size or orientation. • When multiple different original sizes are used in the original, the machine automatically rotates the image to suit the [Binding Edge] setting. ComColor FT Series User's Guide...

  • Page 173: Copy Mode Settings

    Select the offset output setting. [OFF], 1 staple, 2 staples If you select the top for [Binding Edge], select from Touch [OK]. the following options. [OFF], left 1 staple, right 1 staple, 2 staples ComColor FT Series User's Guide...
  • Page 174 For more information on the program, see "Program" (p.72) in "Copying". [OFF] Offset output is not performed. [Between Sets] Each set of printed documents is stacked slightly apart from one another. ComColor FT Series User's Guide...

  • Page 175: Additional Tray

    If a paper jam occurs, open this cover to remove the Load the paper. jammed sheet. Loading the paper • When changing the paper size (paper guide position), contact your dealer or authorized service representative. Pull a tray out toward the front. ComColor FT Series User's Guide...
  • Page 176 Chapter 8 Optional Equipment Push the paper guide back until it is aligned against the outside edge of paper. Push the tray back into the machine. ComColor FT Series User's Guide...

  • Page 177: Multifunction Finisher

    Transfer Cover Booklet Tray If a paper jam occurs, open this cover to remove the Booklets and 2-fold printouts are output here. jammed sheet. Transfer Unit Transfer paper from the printer to the multifunction finisher. ComColor FT Series User's Guide...
  • Page 178 Use to connect the multifunction finisher power cord. Folder Unit Power Distribution Socket Use to connect the folder unit power cord. Transfer Unit Socket Use to connect the transfer unit power cord. Not equipped depending on the multifunction finisher you ComColor FT Series User's Guide...

  • Page 179: Caution Label

    • Your fingers may become caught while the multifunction finisher moves or when you remove printouts from the stacking tray. • The location of the label may be high temperature. Contact may result in burn. ComColor FT Series User's Guide...

  • Page 180: List Of Settings

    [Printer Configuration] in the [Environment] tab on the properties screen • The punch settings are displayed when you has been configured correctly. (p.121 "Printer are using the optional punch unit. Configuration") ComColor FT Series User's Guide...

  • Page 181: Printer Driver Settings

    Each set of printed documents specified in [Sort] is stacked slightly apart from one another. • Paper weight: 52 g/m to 210 g/m (14-lb bond - [Between Jobs] 56-lb bond) Each finished print job is stacked slightly apart from one another. ComColor FT Series User's Guide...
  • Page 182 When printing jobs that exceed the maximum number of sheets that can be stapled, the sheets are output without being stapled. • Paper sizes in inches are as follows: A3 (Ledger) A4 (Letter) B4 (Legal) ComColor FT Series User's Guide...
  • Page 183 For [1 Staple] binding, the staple angle may differ from the images above and the print images on the printer driver screen, depending on the paper size or orientation. • When multiple different original sizes are used in the original, the machine automatically rotates the image to suit the [Binding Edge] setting. ComColor FT Series User's Guide...
  • Page 184 Z-fold: A3, B4, Ledger, 8K • You cannot fold the paper in two, which has a width longer than its height. • Paper weight: 60 g/m to 90 g/m (16-lb bond - 24-lb bond) [OFF] Paper is not folded. ComColor FT Series User's Guide...
  • Page 185 When you have selected [Z-fold], specify the outside. binding position. Bi-fold [Bind Left/Top] Fold the right half of the paper in Z shape. [Bind Right/Bottom] Fold the left half of the paper in Z shape. ComColor FT Series User's Guide...
  • Page 186 You cannot use the paper which has a width longer than its height. Example: When [ON] has been selected for separating books and [Fold] has been set for a 60- [OFF] page original Booklet binding is not performed. ComColor FT Series User's Guide...
  • Page 187 [Top Click [Print Cover Only] under Tray] or [Stacking Tray]. [Booklet Cover]. Click [Details] to display [Output Tray] dialog box. Specify whether to output printouts face-up or face-down to the tray. ComColor FT Series User's Guide...

  • Page 188: Copy Mode Settings

    [Between Sorts] Each sorted set is stacked slightly apart from one another. [After a Job] Each print job is stacked slightly apart from one another. ComColor FT Series User's Guide...
  • Page 189 The left 1 staple and the right 1 staple are [ON]. displayed only when the top is selected for [Binding Edge]. Touch [OK]. Touch [Staple / Punch]. Select the original orientation. Configure [Binding Edge]. Configure [Staple]. Touch [OK]. ComColor FT Series User's Guide...
  • Page 190 Touch [Fold]. [Fold Direction] Select whether to fold the print surface inside or outside. Select the folding type. Fold Fold direction Select [Fold Direction]. [Bi-fold] Touch [OK]. When you have selected [Z-fold]  Touch [Fold]. ComColor FT Series User's Guide...
  • Page 191 Data is imposed to create a book by opening, layering, and then binding the sheets (in the center). Touch [Output Tray]. When [OFF] has been selected, the sheets are not stapled even if [Fold + Staple] is selected. ComColor FT Series User's Guide...
  • Page 192 "Program" (p.72) in "Copying". [OFF] Offset output is not performed. [Between Sets] Each set of printed documents is stacked slightly apart from one another. [Between Groups] Each group of printed documents is stacked slightly apart from one another. ComColor FT Series User's Guide...

  • Page 193: Stacking Tray (Auto-Control Stacking Tray / Wide Stacking Tray)

    When the machine is idle and there is paper in the stacking tray, the paper guides spread apart, making it easy to remove the paper. The administrator can configure which paper guides spread apart when the button is pressed. ComColor FT Series User's Guide...
  • Page 194 Lower the paper guide (end) toward the stacking tray to fold it up. • Fold all paper guides when printing on paper larger than 320 mm × 432 mm (12 19/32" × 17"). Fold up the paper arranger. ComColor FT Series User's Guide...

  • Page 195: List Of Settings

    Select the output tray for printouts. Output Tray output tray automatically p.194 Relay when the tray is full. • The tray details displayed on the [Output Tray] screen vary depending on the optional equipment that is connected. ComColor FT Series User's Guide...

  • Page 196: Maintenance Mode Settings

    When [Output Tray Relay] is configured, [Sort] is set to [Uncollated]. (p.62 "Sort") Maintenance Mode Settings Paper Guide Control Adjust the position of the paper guides of the auto- control stacking tray. For more information, see the separately provided "Troubleshooting Guide". ComColor FT Series User's Guide...

  • Page 197: Postscript Kit

    [OK]. configure the settings. On the authentication screen, enter values for [Name] and [Password], and click [Install Software]. Follow the on-screen instructions to configure the settings. • Contact your administrator for [Name] and [Password] information. ComColor FT Series User's Guide...
  • Page 198 The print que screen of the printer is displayed. You can check the printer information by clicking each tab. On the [Add] screen, click [IP] and enter the IP address and queue. Queue: Enter "lp" in lower case characters for the queue. ComColor FT Series User's Guide...
  • Page 199 LAN, set the machine MAC address on the printer driver. • If you try to print in a network environment where Wake On LAN communication is not enabled, the printer does not wake up automatically. ComColor FT Series User's Guide...
  • Page 200 [Registered Folder] and click [Add ->]. Set the personal folder. For personal folders, select the [Use Personal Folder] check box. Click [OK]. The MAC Address of the machine is displayed in [MAC Address of the Printer]. ComColor FT Series User's Guide...

  • Page 201: Installing To Linux

    • Delete the following folder and file from the Mac OS startup volume as needed. The [RISO] folder in [Library] - [Printers]. Uninstalling the PPD File The "RSFT****.ppd" file in [Library] - [Printers] - [PPDs] - [Contents] - [Resources] Open the screen for registering a printer.

  • Page 202: How To Print

    [Printing Preferences] screen in Windows Saves the original data in a folder on the machine. as an example. In addition, create a PRN file to use in the Barcode Area Definition Software. [Form] Registers forms. ComColor FT Series User's Guide...

  • Page 203: [Favorites] Tab

    2. Pages 2 through 4, along with page 14, none of which have a specified tray, are printed from the tray specified in the [Paper Tray] setting. ComColor FT Series User's Guide...

  • Page 204: [Finishing] Tab

    20 sheets each. Specify a value between -2 and +2. [Cyan], [Magenta], [Yellow], [Black] Adjust the gamma value of each color. ComColor FT Series User's Guide...

  • Page 205: [Advanced] Tab

    Out-of-gamut colors are converted to the closest reproducible color in the destination color space. • This method preserves more of the original colors in an image than [Perceptual]. ComColor FT Series User's Guide...
  • Page 206 [Preferred Layer] When [Each Page Overlay], [Each Page + Alternating Overlay (Long Edge)], or [Each Page + Alternating Overlay (Short Edge)] is selected, specify whether to assign priority to the form or the output data. ComColor FT Series User's Guide...
  • Page 207 Edge)]/[Each Page + Alternating Overlay (Short Edge)] The form is overlaid on the output data on one side, and a different form is printed on the other side. You can specify the separate forms in [Form 1] and [Form 2]. ComColor FT Series User's Guide...
  • Page 208 Priority is given to the form data layer, and it is selected in [Print Pattern], specify whether to print overlaid on top of the output data. the form data on the front or back side of the paper. ComColor FT Series User's Guide...

  • Page 209: [Environment] Tab

    Displays the form data that have been sent by The files inside the blue rectangles in the above selecting [Form] in the [Output] setting of the RISO figure are displayed on the document list screen. ComColor FT PS Printer Driver.
  • Page 210 Select the output tray for printouts. p.189 (When using the optional multifunction finisher) Output Tray Select the output tray for printouts. (When using the p.193 optional stacking tray) ComColor FT Series User's Guide...
  • Page 211 Rotate the image 90 degrees automatically when the Auto Image Rotation p.76 orientation of the original and paper do not match. The [Mixed Size Z-fold] function under [Fold] is not available. ComColor FT Series User's Guide...

  • Page 212: Font List

    LubalinGraph-BookOblique Clarendon LubalinGraph-Demi Clarendon-Bold LubalinGraph-DemiOblique Clarendon-Light Marigold CooperBlack Monaco CooperBlack-Italic MonaLisa-Recut Copperplate-ThirtyThreeBC NewCenturySchlbk-Bold Copperplate-ThirtyTwoBC NewCenturySchlbk-BoldItalic Coronet-Regular NewCenturySchlbk-Italic Courier NewCenturySchlbk-Roman Courier-Bold NewYork Courier-BoldOblique Optima Courier-Oblique Optima-Bold Eurostile Optima-BoldItalic Eurostile-Bold Optima-Italic Eurostile-BoldExtendedTwo Oxford Eurostile-ExtendedTwo Palatino-Bold Geneva Palatino-BoldItalic ComColor FT Series User's Guide...
  • Page 213 Arial Bold Palatino-Italic Arial Bold Italic Palatino-Roman Arial Italic Symbol AvantGarde-Book Symbol IPS AvantGarde-BookOblique Times New Roman AvantGarde-Demi Times New Roman Bold AvantGarde-DemiOblique Times New Roman Bold Italic Bookman-Demi Times New Roman Italic Bookman-DemiItalic Times-Bold Bookman-Light ComColor FT Series User's Guide...

  • Page 214: Printing From Your Tablet Or Smartphone

    Chapter 8 Optional Equipment Times-BoldItalic Installing the Application Times-Italic Times-Roman Univers Bold Install RISO PRINT-S from App Store or Google Univers Bold Italic Play. Univers Condensed Bold Univers Condensed Bold Italic Univers Condensed Medium Univers Condensed Medium Italic Univers Medium...

  • Page 215: Chapter 9 Appendix

    About Ink Cartridges p.214 This section describes how to replace ink cartridges. Specifications p.215 This section describes the specifications of the ComColor FT Series and optional equipment. Consumables p.227 This section describes the specifications of ink cartridges and spare staples.

  • Page 216: About Ink Cartridges

    Position the ink cartridge so that the ▲ mark faces upward, and insert it until it stops. Open the front cover. Close the front cover. Remove the ink cartridge identified as empty. Confirm the color of the ink cartridge. ComColor FT Series User's Guide...

  • Page 217: Specifications

    Simplex: 108 ppm Duplex: 54 sheets/minute FT2430/ Print Speed ComColor Letter Simplex: 108 ppm Duplex: 54 sheets/minute black JIS-B4 Simplex: 90 ppm Duplex: 42 sheets/minute FT1430/ FT1430R Simplex: 79 ppm Duplex: 39 sheets/minute Ledger Simplex: 77 ppm Duplex: 38 sheets/minute ComColor FT Series User's Guide...
  • Page 218 ComColor black FT1430/FT1430R: 65 dB (A) or less at printing Operating Noise ComColor FT5230/FT5230R: 62 dB (A) or less at printing * A4-LEF (Simplex) at the maximum print speed / Plain paper (64 g/m (17-lb bond)) ComColor FT Series User's Guide...
  • Page 219  Basic Functions and Print Functions Model Name ComColor FT5231/FT5231R: 67A04 Type Console Color Support 4 colors (Cyan, Magenta, Yellow, Black) Print Type Line-type inkjet system Ink Type Oil-based pigment ink (Cyan, Magenta, Yellow, Black) ComColor FT Series User's Guide...
  • Page 220 * A4-LEF (Simplex) at the maximum print speed / Plain paper (64 g/m (17-lb bond)) A-weighted Sound Power Level Max. 78 dB A4-LEF (Simplex) Monochrome/Color: 120 ppm Temperature: 15ºC to 30ºC (59ºF to 86ºF) Operating Environment Humidity: 40% to 70% RH (non-condensing) ComColor FT Series User's Guide...
  • Page 221 Line smoothing: 600 dpi × 600 dpi Warm-up Time 2 min. 30 sec. or less (at room temperature of 23ºC (73.4ºF)) First Print Time 5 sec. or less (A4) *2 *6 Continuous Print Speed Simplex: 100 ppm Duplex: 50 sheets/minute ComColor FT Series User's Guide...
  • Page 222 Indoor type, pollution degree 2 , At altitudes of 2,000 m or lower * The pollution degree of the usage environment due to dirt and Safety Information dust in the air. Degree "2" corresponds to a general indoor environment. ComColor FT Series User's Guide...
  • Page 223 Minimum: 100 mm × 148 mm (3 15/16" × 5 27/32") Feeder (ADF) Paper Weight 52 g/m (14-lb bond) to 128 g/m (34-lb bond) 80 g/m (21-lb bond): Max. 200 sheets Original Capacity Height up to 25 mm (1") ComColor FT Series User's Guide...
  • Page 224 10-bit input and 8-bit output for each RGB color Levels Scanning Resolution 600dpi, 400dpi, 300dpi, 200dpi Monochrome/Color: 100 ppm Scanning Speed * RISO KAGAKU standard original (A4-LEF), 300 dpi, JPEG, PDF, when stored to main unit hard drive Scan Functions Network Interface Ethernet 1000BASE-T, 100BASE-TX, 10BASE-T...
  • Page 225 90 g/m to 210 g/m (24-lb bond - 56-lb bond)) Top Tray Height up to 50 mm (1 15/16") Tray Capacity Stacking Tray Height up to 200 mm (7 7/8") Booklet Tray Height up to 50 mm (1 15/16") ComColor FT Series User's Guide...
  • Page 226 Indoor type, pollution degree 2 , At altitudes of 2,000 m or lower * The pollution degree of the usage environment due to dirt and Safety Information dust in the air. Degree "2" corresponds to a general indoor environment. ComColor FT Series User's Guide...
  • Page 227 Tray Capacity A4, B5, Letter, 16K Power Source Power supplied from the main unit Dimensions (W × D × H) 415 mm × 600 mm × 390 mm (16 11/32" × 23 5/8" × 15 11/32") ComColor FT Series User's Guide...
  • Page 228 PCL: 88 Roman fonts Genuine Adobe engine RISO shall not provide any PCL printer driver. For PCL output, available functions differ from printing via PS printer driver. When you need the functions not available for PCL output, print via PS printer driver.

  • Page 229: Consumables

    Use the ink cartridge within approximately 24 months from the date of manufacture (when preserved under room temperature). For optimal printing quality, we recommend that you use the ink cartridge as soon as possible after purchase. You can find the date of manufacture on the ink cartridge. ComColor FT Series User's Guide...

  • Page 230: Index

    Document list screen in [USB] - [Load] Canceling copying Document name Card-IJ Dot process Center margin 66, 185 Double-feed check Change setting screen Downloading scanned jobs to a computer Change setting screen in [Storage] - [Save] Draft ComColor FT Series User's Guide...
  • Page 231 Logging into the RISO Console Grayscale Login Login / logout key Lower right cover Halftone HDD usage Head cleaning 40, 156 Mac address High-quality Machine info screen Home key Machine socket Home screen Magenta 59, 104 Main power LED ComColor FT Series User's Guide...
  • Page 232 Paper guide (end) Scan menu screen Paper guide control Scan screen Paper guides (side) Scanner 29, 29 Paper guides open button Scanning level 62, 90 Paper jam indication led Scanning size 61, 89 Paper selection Screening ComColor FT Series User's Guide...
  • Page 233 Top side up Top tray Top/bottom Touch panel 31, 41 Transfer cover Transfer unit Tray selection per page Tri-fold output tray button Tri-fold output tray capacity Uncollated 62, 105 Unusable paper Upper right cover USB port 067-36006-306 ComColor FT Series User's Guide...
  • Page 235 The purpose of the "e-waste Rule" is to reduce waste and ensure Electrical Equipment is recycled at the end of life. RISO declares our products comply with the "India E-waste Rule" and prohibits use of lead, mercury, hexavalent RISO declares our products comply with the "India E-waste Rule" and prohibits use of lead, mercury, hexavalent RISO declares our products comply with the "India E-waste Rule"...
  • Page 236 Please contact the following for supplies and service: 2020/10 © Copyright 2020 RISO KAGAKU CORPORATION...

This manual is also suitable for:

Comcolor black ft seriesFt 5430Ft 5430rFt 5230Ft 5230rFt 5231 ... Show all

Table of Contents