Riso ComColor X1 series Technical Manual page 858

Paper transport to the Stacker Tray
• When the S2 Gate switches the paper path toward the Stacker Tray, the paper is sent toward the Stacker Tray
by the Buffer Roll, Buffer Rev. Roll, and Compile Exit Roll, which are all driven by the Compile Exit Motor.
Detection by the Sensors
• The paper transport status is detected by the Top Tray Exit Sensor, Buffer Path Sensor, and Compile Exit
Sensor, which are all located along the paper path.
• The Top Tray Full Sensor monitors the Top Tray, signaling when it is full.
SCT Exit Motor
Finisher Transport
Motor
Transport Gate
Solenoid
Booklet Gate
Solenoid
S2 Gate S1 Gate
Compile Exit Motor Top Exit Roll
T/A 2 Roll
Buffer Path Sensor
Punch Reverse Roll
Top Tray Exit Sensor
Buffer Roll
[ 24-43 ]
Multifunction Finisher II (option)
Top Tray Full Sensor
Compile Exit Roll
Compile Exit Sensor
Buffer Reverse Roll
T/A 1 Roll
x1 Series ComColor (Revision 0.9)