Riso ComColor X1 series Technical Manual page 577

Test Modes
Data Editing (D)
No. Process Name
722 REV Event Extension Set
723 Manual Event Code 1 Set
724 Manual Event Code 2 Set
725 Manual Event Code 3 Set
726 USB Port Enable
727 Exterior Controller Selection
Scanner Connection
728
Selection
Supply Stock Display
729
Setting
Mono Color Print Limitation
730
Selection
731 Mail Header Encode
Rev.1.00
ComColor Unit (0001-0999)
Default Unit/Range
0: Normal
0
1: Extended
0000 0000–9999
0000 0000–9999
0000 0000–9999
0: Prohibited
0
1: Permitted
0: Not connected
0
1: Connected
0: Not connected
1: Connected
0 (Copy & Scan)
2: Connected
(Copy)
0: Not shown
0
1: Shown
0: Mono Color
1
1: Full Color
0: UTF-8
encoding.
0
1: No UTF-8
encoding
[ 16-34 ]
Description
For rev. event selection.
0: Normal: Events are generated when the printer is turned
ON, when errors occur, and when manual events are
confi gured.
1: Extended: Events are generated when the printer is
turned ON, when errors occur, when manual events are
confi gured, and when printing starts.
This test mode can only be executed when test mode 00721
is enabled.
Display in the menu and input using the numeric keypad are
only possible when enabled.
When the four-digit event code is specifi ed, a manual event
is issued.
This test mode can only be executed when test mode 00721
is enabled.
Display in the menu and input using the numeric keypad are
only possible when enabled.
When the four-digit event code is specifi ed, a manual event
is issued.
This test mode can only be executed when test mode 00721
is enabled.
Display in the menu and input using the numeric keypad are
only possible when enabled.
When the four-digit event code is specifi ed, a manual event
is issued.
This test mode can only executed when test mode 00721 is
enabled.
Display in the menu and input using the numeric keypad are
only possible when enabled.
Specifi es whether USB ports can be used.
Specifi es whether an external CI (PS controller) is
connected.
0: Not connected: Functions involving a PS controller are
not available.
1: Connected: Functions involving a PS controller are
available.
Specifi es whether a scanner is connected.
0: Not connected: Copy and scanner mode are not
available. (Even if a scanner is connected, functions
involving the scanner are not shown, no communication
occurs, and no errors involving the scanner are shown.)
1: Connected: Copy and scanner modes are available.
2: Connected: Copy mode is available.
Specifi es whether the "Supply Stock Control" item in the
administrator settings is shown.
When choose 0:
Mono color (Cyan or Magenta) print will be count as a mono
color.
Mono color print can be performed, even though [Full color
print prohibited] was chosen by the user.
When choose 1:
Mono color (Cyan or Magenta) print will be count as a full
color.
If [Full color print prohibited] was chosen by the user, can
not perform the mono color print.
Selection of the Encoding method.
Use [0] setting in normal condition.
Use [1] setting only when the sender name and receiver
name do not show properly. Otherwise use [0] setting.