Riso ComColor X1 series Technical Manual page 747

Face Down Offset Stapler
4-20. Eject Roller (driven side) removal
1. Remove the paper Stacking Tray. (Bind screw 4x8 (2 pcs))
2. Remove the Top Cover (IT3C screw 4x8 (2 pcs))
Paper Stacking Tray
3. Remove the Paper Drop Guide Assembly.
4. Remove thin white plastic snap ring from the outer most tip of the driven Eject Roller (driven).
< Remove only one specified snap ring.>
［ 19-60 ］
Paper Drop Guide Assembly
Eject Roller (driven)
［ 19-60 ］
Thin white plastic snap rings.
Option
Top Cover