Riso ComColor X1 series Technical Manual page 864

Hide thumbs Also See for ComColor X1 series:

Table of Contents

• When paper is received by the Compile Tray, the Tamper on the rear moves to the front to align the paper width-

wise. (The Tamper on the front is stationary.)

• The Tamper is driven by the Tamper Motor. The Tamper home position (the rearmost position) is detected by

the Tamper Home Sensor.

Tamper Home Sensor

Tamper Motor

Multifunction Finisher II (option)

x1 Series ComColor (Revision 0.9)

Chapters

Table of Contents