Riso ComColor X1 series Technical Manual page 62

External Paper Feed Section
2. Paper Stripping Mechanism
Paper in the paper feed tray is sent between the pickup roller and stripper plate by rotation of the scraper.
Additionally, paper is carefully handled by the pickup roller and stripper plate so that only the top sheet is sent
inside the unit.
The stripper plate is pressed against the pickup roller by the force of the stripper spring, which creates resistance
against incoming paper and enables sheets to be handled correctly.
The angle and pressure of the stripper plate can be adjusted with the stripper angle and stripper pressure adjusters.
Pickup roller
Stripper plate
Stripper angle adjuster
Stripper spring
Stripper pressure adjuster
Adjusting the pressure of stripping
Adjusting the angle of stripping
[ 4-8 ]
ComColor Series (Revision 2.4)