Riso ComColor X1 series Technical Manual page 422

4. Select the correct Time Zone and then push the
NOTE: It is of no problem if the
Use test mode No. 505 [SETUP WIZARD INITIALIZE] later and choose the correct selection.
CAUTION ! : Do not press the
The Setup Wizard display closes and you will be stuck with the Japanese Language again.
5. Input the correct Clock/Date and then push the
NOTE: It is of no problem if the
Use test mode No. 505 [SETUP WIZARD INITIALIZE] later and input the correct Clock/Date or go into the Admin to
set the Clock/Date.
CAUTION ! : Do not press the
The Setup Wizard display closes and you will be stuck with theJapanese Language again.
6. Input the Network Setting and then push the
NOTE: It is of no problem if the
The network information can be input in the machine later. Use test mode No. 505 [SETUP WIZARD INITIALIZE]
later and input the network setting or go into the Admin to input the network setting.
CAUTION ! : Do not press the
The Setup Wizard display closes and you will be stuck with the Japanese Language again.
Next button on the following display.
Next button is pushed with a wrong selection.
Cancel button.
Next button on the following display.
Next button is pushed with wrong input.
Cancel button.
Next button on the following display.
Next button is pushed without the network information.
Cancel button.
[ 14-71 ]
Electronic Components
Rev.1.00