Riso ComColor X1 series Technical Manual page 13

Print head positioning jig
Required in removing and replacing the Print
head on the machine.
One piece comes with the machine.
If extra pieces are needed, order the required
quantity as spare part.
Plastic forceps
Needed in working on the ink flow system.
4 pieces come with the machine.
For extra pieces, order them as spare parts.
Do not use the GREEN colored plastic forceps, which are
designed for HC models, on the ComColor ink tubes.
The green colored ones can only be used on the air tubes on
the ComColor machines.
Plastic tube clamp
These are used for clamping the ink tubes
during machine re-shipping.
Should not used on the ink tubes for only a
short time. Long term use will deform the ink
tubes.
Metal clip
These locally purchased metal clips maybe
applied on the ink tubes for temporary short
period on the site to stop the ink flow while
working on the ink flow system.
Use of dedicated plastic forceps is more recommended
Wrist band (static electricity remover)
Recommended to use these wrist bands when
working on the Print heads and Printed circuit
boards on the machine for static electricity
damage prevention.
Plastic cups
Rectangular plastic cups are convenient to
have in temporary resting of the removed Print
heads and also in catching the draining ink
while working on the ink flow system.
[ 1-13 ]
Maintenance
ComColor Series (Revision 2.4)