Riso ComColor X1 series Technical Manual page 587

Test Modes
Data Editing (D)
No. Process Name
FD Ejection Fence HP
1945
Adjustment
FD Ejection Fence HP
1946
Adjustment (CARD)
1947 Image Mask (RIGHT)
1948 Image Mask (LEFT)
Data Editing (D)
No. Process Name
BP Power OFF Position
2701
Selection
Ink Temperature Detection
2710
ON/OFF Adjustment
2711 Head Replacement Mode
Head Adjustment Print
2712
Mode
Ink Drop Timing / Belt
2713
Strech
2730 Recovery Cleaning 1 Setting
2731 Recovery Cleaning 2 Setting
2732 Recovery Cleaning 3 Setting
Recovery Cleaning 1 ON/
2733
OFF
Recovery Cleaning 2 ON/
2734
OFF
Recovery Cleaning 3 ON/
2735
OFF
Recovery Cleaning
2736
Activation Timing
2737 BP Fix Position Power OFF
Bellows Arm Fix Position
2738
Selection
2748 MD Recovery Print Quantity
MD Recovery Action
2749
Operation Quantity
Rev.1.00
ComColor Unit (Series 1000)
Default Unit/Range
0 (-500–500)
0 (-500–500)
50 5-250
50 5-250
ComColor Unit (Series 2000)
Default Unit/Range
0: Normal position
0 1: Shipping
position
0: Enable
0
1: Disable
0: Disable
0
1: Enable
0: OFF
0
1: ON
0: Does not
1 compensate
1: Compensates
8 8-240hours
7 1-60day
90 5-120days
0: Disable
1
1: Enable
0: Disable
0
1: Enable
0: Disable
0
1: Enable
Specifi es the timing of recovery cleaning 1, 2, and 3.
1 0: When printing starts
1: When the printer is turned ON, or when recovering from sleep
0: Normal position
0 1: Shipping
position
0: Normal position
0
1: Fixed position
1 1-10sheet
3 1-20time
[ 16-44 ]
Description
Adjusts the position of the FD paper ejection fence (home
position adjustment). (1=0.1mm)
Adjusts the position of the FD paper ejection fence when
postcards are used (home position adjustment). (1=0.1mm)
The selected parameter applies when the CIS side mask is
disabled by test modes No.77 34, 77 80, 7826, 7872, 9734,
9780, 9826, 9872 and 9918.
Applies to External paper feed tray feeding only and no
envelope. (1=0.1mm)
Description
Selecting to [1] will stop the BP unit in shipping position
when power is turned OFF.
When selected to [1] , it stays at [1] until manually selected
back to [0].
[0] lowers the BP unit all the way down to the normal
position when powered OFF.
Deactivates ink temperature detection during activation of
other test modes by selecting the setting to [1: OFF].
Used commonly in conjunction with Test Modes No.2428
and 2431 to circulate the ink.
Activate this setting during replacement of heads or the ink
circulation system.
Initial ink circulation processing is executed when power is
supplied and when the setting is activated.
A mode enabling printing when the upper transfer unit is
removed.
Used during head adjustment.
Selected to [1] , the ink drop timing compensates with the
stretch of the BP belt.
The period for executing recovery cleaning 1 (The time that
elapses after the previous cleaning.)
The period for executing recovery cleaning 2 (The time that
elapses after the previous cleaning.)
The period for executing recovery cleaning 3 (The time that
elapses after the previous cleaning.)
Specifi es whether recovery cleaning 1 (normal cleaning) is
executed (ON) or not (OFF).
Specifi es whether recovery cleaning 2 (strong cleaning) is
executed (ON) or not (OFF).
Specifi es whether recovery cleaning 3 (extra cleaning) is
executed (ON) or not (OFF).
Selecting to [1] will stop the BP unit in shipping position
when power is turned OFF.
With the next machine power ON, the selection goes back
to [0] automatically.
[0] lowers the BP unit all the way down to the normal
position when powered OFF.
Selects the bellows arm position when the machine is
turned OFF or when goes to sleep.
Specifi es the number of prints to make in MD recovery
action.
Specifi es the number of operation quantity of the MD
recovery action.
1 time = print + normal cleaning.
2 times = (print + normal cleaning) x 2 times, etc.