Riso ComColor X1 series Technical Manual page 529

Panel Messages
4-7. Loading/Interlock Detection Errors (I)
Type I01: Maintenance call
!!Maintenance!!
Display
Call Service.
Do one of the following.
• Press the Close button.
Clear
• In test mode 01900, set the maintenance guideline value to 0.
Note: To resolve the underlying problem, change the setting in test mode 01900.
Point Description
1403
The maintenance call guideline value for printing quantity has been reached.
Type I02: Waste ink tank nearly full
Display
The drain tank must be replaced soon. Call service to prepare a new drain tank.
Do one of the following.
• Press the Close button.
Clear
• Remove the waste ink tank.
• Allow the waste ink tank to become full (the message will be cleared automatically).
Note: To resolve the underlying problem, remove and replace the waste ink tank.
Point Description
It is almost time to replace the waste ink tank.
2062 Waste ink tank sensor 1 (top): ON
Waste ink tank sensor 2 (bottom): ON
Type I03: Operating in temporary registration status
!!Temporary Operating Mode!!
Display
This massage will be hidden after the temporary operating period.
Do one of the following.
• Press the Close button.
Clear
• Access test mode 08400 to force offi cial registration of the printer.
• Allow the period of temporary registration to expire (the message will be cleared automatically).
Note: To resolve the underlying problem, change the setting in test mode 08400.
Point Description
1814
Printer operating in temporary registration mode.
Type I05: Using ink for another model
Wrong-type ink cartridge is installed or cannot be read ink info.
Display
The ink cartridge will be unusable if this goes on.
Replace the ink cartridge or contact RISO Dealer/Branch.
Do one of the following.
• Press the Close button.
Clear
• Remove the relevant ink cartridge and replace with a correct ink cartridge.
Note: To resolve the underlying problem, replace the ink with ink compatible with the machine.
Point Description
Unsupported Black ink cartridge is installed.
2099 1
< The ink cartridge cannot be used after the temporary machine registration period ends.>
Unsupported Cyan ink cartridge is installed after the period of temporary registration.
2099 2
< The ink cartridge cannot be used after the temporary machine registration period ends.>
Unsupported Magenta ink cartridge is installed after the period of temporary registration.
2099 3
< The ink cartridge cannot be used after the temporary machine registration period ends.>
Unsupported Yellow ink cartridge is installed after the period of temporary registration.
2099 4
< The ink cartridge cannot be used after the temporary machine registration period ends.>
[ 15-98 ]