Overall Structure - Riso ComColor X1 series Technical Manual

3. Overall structure

3-1. Paper transport paths
(1) Paper printed by ComColor is sent to the IF Unit via the optional FU Paper ejection attachment.
(2) Paper transported from the IF Unit is sent to the Puncher section.
(3) When the punching function is set, paper is processed at the Puncher section.
After passing the Puncher section, paper is sent from the S1 Gate toward either the Booklet section or Top
Tray/Stacker Tray.
(4) Paper moving toward the Top Tray/Stacker Tray is sent from the S2 Gate to either the Top Tray or the Stacker
Tray for output.
(5) When paper is to be stapled, it is sent toward the Stacker Tray, then it is retracted toward the Stapler.
When sheets for one stapling set are collected, they are stapled and discharged onto the Stacker Tray.
(6) Sheets sent to the Booklet section are stapled when all pages for one booklet are collected, and then folded in
half and discharged onto the Booklet Tray.
Interface Unit
S2 Gate
S1 Gate
Puncher
[ 24-9 ]
Multifunction Finisher II (option)
Top Tray
Stapler
Booklet Tray
x1 Series ComColor (Revision 0.9)
Stack Tray