Riso ComColor X1 series Technical Manual page 887

Multifunction Finisher II (option)
1-4. Booklet Tray operation
• The Booklet Tray is positioned below the paper outlet. Each time a set of paper is discharged, the Paper
Transfer Belts rotate for a preset duration to offset each set of paper slightly.
• The Paper Transfer Belts are driven by the Tray Belt Drive Motor.
• If the end tip of the tray is tilted down, the output booklets automatically falls down from the tray for continuous
booklet ejection.
• To remove the booklets, press the Booklet Tray Belt SW on the Finisher to rotate the Paper Transfer Belts to the
paper removal position.
(After a print job is completed, the Paper Transfer Belts automatically rotate to move the last booklet to the
removal position.)
For this to be active, the Test Mode No.4751 "BOOKLET BELT SETTING" needs to be set to [1].
If set to [0], this function is disabled.
Booklet Eject Roll
Tray Belt Motor
Booklet Folder Roll Exit Sensor
Booklet NO Paper Sensor
[ 24-72 ]
End tip of the Tray, when folded down,
enables the booklets to drop down from
the tray and feed out continuously.
Paper Transfer Belt
x1 series ComColor (Revision 0.9)