Disassembly - Riso ComColor X1 series Technical Manual

4. Disassembly

4-1. Removing the Main Paddle and Sub Paddle
> The Main Paddle and Sub Paddle must be replaced periodically as a pair (at the same time).
> To determine when to replace the Main Paddle and Sub Paddle, check the counters using Test Mode No. 4601
"STACKER SUB-PADDLE COUNT" and Test Mode No. 4602 "STACKER PADDLE COUNT".
(1) Remove the following covers.
• Finisher Rear Upper Cover
• Eject Cover
• Top Tray
Top Tray
Eject Cover
(2) Remove the Staple Inner Cover (black inner cover on the front Stapler section).
Finisher Rear Upper Cover
[ 24-51 ]
Multifunction Finisher II (option)
Staple Inner Cover
x1 Series ComColor (Revision 0.9)