Riso ComColor X1 series Technical Manual page 666

Unit Checking (U)
7414 PB Clamp Insert Position
Move the PB clamp to insert position.
7415 PB Clamp Home Position
Move the PB clamp to home position.
7416 PB Clamp Glue Position
Move the PB clamp to glue position.
7417 PB Clamp Nipping Position
Move the PB clamp to nipping position.
7418 PB Clamp Insert Horizontal Position
Move the PB clamp to insert horizontal position.
7419 PB Clamp Horizontal Home Position
Move the PB clamp to horizontal home position.
7420 PB Clamp Horizontal Glue Position
Move the PB clamp to horizontal glue position.
7421 PB Clamp Horizontal Nipping Position
Move the PB clamp to horizontal nipping position.
7422 PB Glue Sheet Release Position
Move PB Glue Sheet to release position.
7423 PB Glue Sheet Press Position
Move PB Glue Sheet to press position.
7425 PB Nipping Plate (Open)
Open the PB Nipping Plate.
7426 PB Nipping Plate (Close)
Close the PB Nipping Plate.
7427 PB Cover Guide Plate Tamper Position
Move PB Cover Guide Plate to tamper position.
7428 PB Cover Guide Plate Home Position
Move PB Cover Guide Plate to home position.
7430 PB Glue Position Tilt Adjustment
Move the body block from stack position to glue position, and stops.
7431 PB Glue Position Tilt Check & Eject
Eject the body block after perform TM No. 7430.
7432 PB Nipping Position Tilt Adjustment
Move the body block from stack position to nipping position, and stops.
7433 PB Nipping Position Tilt Check & Eject
Eject the body text after perform TM No. 7432.
7435 PB Cover Cut Drive
Move the cutter to cut position, then move to home position.
7436 PB Cover Cut Adjustment (Interposer)
Cut the cover, then transfer the cover to nipping position.
7438 PB Glue Roller Motor
Starts and stops the PB Glue Roller Motor.
7439 PB Halogen Heater
Starts and stops the PB Halogen Heater.
7440 PB Sheath Heater
Starts and stops the PB Sheath Heater.
7441 PB Glue Cut Heater
Starts the PB Glue Cut Heater.
7442 PB Clamp Horizontal Exit Position
Move the PB Clamp to horizontal exit position.
7443 PB Clamp Horizontal Blade Position
Move the PB Clamp to horizontal blade position.
7444 PB Cover Tray Lift Up
Starts and stops the PB Cover Tray lift-up.
Upper: No./Process Name, Lower: Description
[ 16-123 ]
OPTIONS / Perfect Binder
Test Modes
Rev.1.00