This publication is intended as a brief introduction to printing from a PC to a Riso Comcolor X1 Series printer using the built-in GDI controller. For full instructions please refer to the user guides supplied with the Riso machine. RISO (UK) Limited...
Page 3
Contents 1). Producing single sided A4 copies 2). Producing double sided (duplex) copies 3). Enlargement to A3 4). Mul -up - same images on one page 5). Mul -up - diff erent images on one page 6). Booklets (folding and stapling of booklets will require op onal fi nishing unit installed) 7).
Page 4
1). Select > File > Print and the Print Dialogue box shown opposite will open 2). Select the Riso Comcolor X1 Series printer from the drop down menu 3). Select > Proper es The Riso Comcolor X1 Series printer proper es will now open up in the [Basic] tab indicated: 1).
Page 5
Producing Double Sided (Duplex) Copies Follow sec on A of page 2 to open up the Proper es of the Riso Comcolor X1 Series then: 1). Select paper size you wish to print on from the drop down menu > Paper Feed Tray Choose >...
Page 6
Enlargement to A3 Follow sec on A of page 2 to open up the Proper es of the Riso Comcolor X1 Series then: 1). Choose > Feed Tray 3 for A3 size paper Please note that Select “Paper Size”: 1). Using the drop down menu > Paper size confi...
Page 7
Mul -up - Same image on one page Follow sec on A of page 2 to open up the Proper es of the Riso Comcolor X1 Series then: 1). Select paper size you wish to print on from the drop down menu >...
Page 8
Mul -up - Diff erent images on one page Follow sec on A of page 2 to open up the Proper es of the Riso Comcolor X1 Series then: 1). Select paper size you wish to print on from the drop down menu >...
Page 9
A4 and A5 Booklets Follow sec on A of page 2 to open up the Proper es of the Riso Comcolor X1 Series then: 1). Select paper size you wish to print on from the drop down menu > Paper Feed Tray Choose >...
Page 10
A4 Stapling - Portrait The following func on will require the op onal Face Down Off set Stapler or the Mul func onal Finisher unit to be fi ed Select The “Main Se ngs” tab 1). For A4 select > Standard Feed Tray This is the default se ng Select The “Finisher”...
Page 11
A4 Stapling - Landscape The following func on will require the op onal Face Down Off set Stapler or the Mul func onal Finisher unit to be fi ed Select The “Main Se ngs” tab 1). Select > Standard Feed Tray This is the default se ng 2).
Page 12
Hole Punching - Le or Right The following func on will require the op onal Mul func onal Finisher unit to be fi ed Select The “Main Se ngs” tab 1). For A4 select > Standard Feed Tray This is the default se ng Please note that 3110 models will not have a choice of paper feed trays Select The “Finisher”...
Page 13
Cover Sheet To apply Cover Sheets select The “Finisher” tab 1). Tick the box > Add Cover 2). Select > Details New window will appear 3). Select > Put Front Cover or Put Back Cover (or both) > Put Front Cover Inserts a cover sheet before the fi...
Page 14
Secure Prin ng with Pin Codes This func on may not be necessary if print jobs are already protected by Usernames / Paswords or the IC Card Control system Once you have chosen the required se ngs for your print job: 1).
Page 15
Secure Prin ng - Prin ng Out Using the Comcolor Opera onal Panel Select “Printer” Login if necessary Select “Wai ng” tab: 1). Jobs printed with Pin Code security will be visible in wai ng queue with icon. 2). Touch and highlight job to be printed. 3).
Page 16
Saving Jobs to Storage In order to save jobs in storage the necessary folders have to be setup on the machine and your printer drivers confi gured - if in doubt speak to your Comcolor administrator Once you have chosen the required print se ngs for your print job: 1).
Page 17
Prin ng Out Jobs from Storage In order to access jobs in storage the necessary folders have to be setup on the machine - if in doubt speak to your Comcolor administrator Using the Comcolor Opera onal Panel Select “Printer” on the Touch Screen Select “Folders”...
Need help?
Do you have a question about the Comcolor X1 Series and is the answer not in the manual?
Questions and answers