Riso ComColor X1 series Technical Manual page 838

8-2. Removal of Booklet Unit from the Finisher main unit.
(1) Open the Front Door of the Finisher and gently pull the Booklet Unit forward.
Remove the Lock Plate. (1 screw).
(2) Press the Rail Stoppers on both sides and pull the Booklet Unit forward to dismount.
● When the Booklet Unit is removed, the Stopper on the back of the rail will drop, preventing rail stowage. If
you need to stow the rail, raise the Stopper to the center position.
When the booklet Unit is removed, the Stopper comes down to prevent the Railing to go back
in. (This is to make the reassembly work easier.)
(1) Lock Plate
<Prevents dropping of the Booklet Unit when pulled all
the way out.>
(2) Rail Stopper
[ 24-23 ]
Multifunction Finisher II (option)
x1 Series ComColor (Revision 0.9)