Riso ComColor X1 series Technical Manual page 488

Type W21: Scratch sheets in stacking tray
Display
Unfi nished printed paper is ejected to the fi nisher stacking tray. Check and remove the paper.
Do one of the following.
• Press the Continue button.
Clear
• Press the Cancel button.
• Delete the job.
Point Description
3232
Paper was ejected to the stacking tray before printing was fi nished.
Type W22: Scratch sheets in booklet tray
Display Unfi nished printed paper is ejected to the fi nisher booklet tray. Check and remove the paper.
Do one of the following.
• Press the Continue button.
Clear
• Press the Cancel button.
• Delete the job.
Point Description
3233 Paper was ejected to the booklet tray before printing was fi nished.
Type W23: Scratch sheets in 3-fold tray
Display
Unfi nished printed paper is ejected to the fi nisher 3-fold tray. Check and remove the paper.
Do one of the following.
• Press the Continue button.
Clear
• Press the Cancel button.
• Delete the job.
Point Description
3234
Paper was ejected to the 3-fold tray before printing was fi nished.
Type W24: FD paper receiving tray full
Display
The face down paper receiving tray is full. Remove the paper.
Do one of the following.
Clear
• Press the Cancel button.
• Delete the job.
Point Description
1150
The printer has detected that the face down paper receiving tray is full.
Type W25: Stapler unit not connected
The fi nisher stapler unit is not connected.
Display
Check the connection. (The job has been deleted).
Do one of the following.
Clear • Press the Close button.
• Delete the job.
Point Description
3225
A job was sent specifying stapling, but the stapler unit is not connected to the fi nisher.
Type W26: Puncher unit not connected
The fi nisher punching unit is not connected.
Display
Check the connection. (The job has been deleted).
Do one of the following.
Clear
• Press the Close button.
• Delete the job.
Point Description
3226 A job was sent specifying punching, but the puncher unit is not connected to the fi nisher.
[ 15-57 ]
Panel Messages