Riso ComColor X1 series Technical Manual page 600

Data Editing (D)
No. Process Name
7905 RE-FEED P-BKL (ENV)
FD EJECT SPEED
7912
COMPENSATION (THIN)
7914 BELT SPD RATIO (ENV)
7915 HEAD GAP (ENV)
7916 VERTICAL POS 1 (ENV)
7917 VERTICAL POS 2 (ENV)
7919 FD S-FNC OFFST (ENV)
7921 WING OFFSET (ENV)
7922 FU EJ ROLL SPD (ENV)
7923 AS S-FNC OFFST (ENV)
7924 AS E-FNC OFFST (ENV)
7925 ENV FLAP MARGN (ENV)
TRNS BELT FAN SET (ENV
7926
1)
TRNS BELT FAN SET (ENV
7927
2)
ComColor Unit (Series 7000)
Default Unit/Range
6 0-20mm
0 (-300 - 300)mm/s Compensates the FD ejection speed.
1000 950-1020
Specifi es the head gap.
2
0: Standard 1: Card 2: Envelopes
0 (-20 - 20)mm
0 (-20 - 20)mm
160 (-500 - 500)
(-350) (-500 - 500)
850 177-1500mm/s
(-40) (-200 - 400)
0 (-300 - 300)
420 0-720
100 1-100%
60 1-100%
[ 16-57 ]
Description
Specifi es the amount of slackness in re-feeding.
Specifi es the belt speed ratio.
This is the transfer belt speed ratio relative to a registration
roller speed of 1. (1=0.1%)
Adjusts secondary scanning position 1.
Adjusts secondary scanning position 2.
Adjusts the FD paper ejection fence offset. (1=0.1ms)
Adjusts the FU paper ejection wing offset. (1=0.1ms)
Adjusts the FD paper ejection roller speed.
Adjusts the side paper guide offset of the auto control
stacking tray. (1=0.1ms)
Adjusts the end paper guide offset of the auto control
stacking tray. (1=0.1ms)
Specifi es the length of the overlap width for envelopes.
(1=0.1ms)
Set the transfer belt fan air fl ow rate according to PWM duty
ratio.
Set the transfer belt fan air fl ow rate according to PWM duty
ratio.
Test Modes
Rev.1.00