Disassembly - Riso ComColor X1 series Technical Manual

2. Disassembly

2-1. Stripper Area
Stripper unit
(1) Open the original feed cover.
(2) the stripper unit by rotating it up.
Separation roller
(1) Remove the stripper unit.
(2) Remove the separation roller, as a unit, by rotating it for approximately 90 degrees.
In mounting the separation roller, make sure to attach the spring on the pins at the top and bottom.
2-2. Parts around the Feed Roller
Feed roller unit
(1) Open the original feed cover.
(2) Remove the paper guide. (P-tight bind head screw 3x10 (4 pcs)).
The bottom portion has 2 hooks.
Separation roller
Spring
Paper Guide
[ 20-27 ]
HS5000 Scanner option
Stripper unit
x1 Series ComColor (Revision 0.9)