Registration Section
2-5. Vertical Paper Feed Sensor 1 (Vertical Paper Feed Unit B)
1. Turn OFF the machine power and disconnect the power cable from the power source.
2. Remove vertical paper feed unit B. (Refer to the instructions for removal.)
3. Remove the sensor bracket for sensor 1. (W sems screw 3x6 (1 pc))
4. Remove vertical paper feed sensor 1. (Sems screw 3x14 (1 pc))
Note: After replacement, check operation by test mode 1027 (vertical paper feed sensor 1).
2-6. Vertical Paper Feed Sensor 2 (Vertical Paper Feed Unit B)
1. Turn OFF the machine power and disconnect the power cable from the power source.
2. Remove vertical paper feed unit B. (Refer to the instructions for removal.)
3. Remove the sensor bracket for sensor 2. (W sems screw 3x6 (1 pc))
4. Remove vertical paper feed sensor 2. (Sems screw 3x14 (1 pc))
Note: After replacement, check operation by test mode 1028 (vertical paper feed sensor 2).
2-7. Vertical Paper Feed Sensor 3 (Vertical Paper Feed Unit B)
1. Turn OFF the machine power and disconnect the power cable from the power source.
2. Remove vertical paper feed unit B. (Refer to the instructions for removal.)
3. Remove vertical paper feed sensor 3 from the plastic tabs.
Note: After replacement, check operation by test mode 1029 (vertical paper feed sensor 3).
2-8. Vertical Paper Feed Sensor 4 (Vertical Paper Feed Unit B)
1. Turn OFF the machine power and disconnect the power cable from the power source.
2. Remove vertical paper feed unit B. (Refer to the instructions for removal.)
3. Remove vertical paper feed sensor 4 with the cover. (P-tight screw 3x8 (2 pcs))
4. Remove vertical paper feed sensor 4. (Sems screw 3x14 (1 pc))
Note: After replacement, check operation by test mode 1030 (vertical paper feed sensor 4).
< Vertical Paper Feed unit B >
[ 6-14 ]
Vertical paper feed sensor 4
Vertical paper feed sensor 3
Vertical paper feed sensor 2
Vertical paper feed sensor 1
ComColor Series (Revision 2.4)