Riso ComColor X1 series Technical Manual page 466

Type S99: Software Error
!!System Error!!
Display Reboot by press the Sub Power Key
If recovery has failed, call service.
Clear
Turn OFF the printer. (Turn OFF the printer through sub power key.)
Point Description
Mechanical control software errors 10
0163 1
Maintenance unit and Ink circulation operations could not completed in time.(At mechanic operation)
Mechanical control software errors 11
0163 2
Auxiliary operation sequence could not completed in time.(At mechanic initialization)
Mechanical control software errors 12
0163 3
Could not received job end report from the paper transfer section in time.(Paper transfer testmode)
Mechanical control software errors 13
0163 4
Requested operation can not be executed since the mechanism initialization has not completed.
Mechanical control software errors 14
0163 5
Head drive process could not completed in time.(At MD recovery operation)
Mechanical control software errors 15
0163 6
Authorization cam motor action by test mode could not completed in time.
Mechanical control software errors 16
0163 7
BP unit could not move to the home position with in time.(At mechanic initialization)
0164 1 Software bugs caused a persistent busy state in time after mechanical operations were requested.
0164 2
Authorization cam motor action could not completed in time after mechanical operations were requested.
0165 1
Malfunction detected by RFID tag manager
0165 2 Buffer overfl ow affecting RFID tag manager communication
The RFID tag control SS was notifi ed by the RFID tag manager that ink has run out, but the RFID tag
0165 3
control SS did not issue notifi cation of a "no ink" error.
0166 1
A software error involving paper transfer control was detected in the engine power supply control module.
0166 2
A software error involving RFID tag control was detected in the engine power supply control module.
0166 3
A software error involving mechanical control was detected in the engine power supply control module.
0166 4 A software error involving counter control was detected in the engine power supply control module.
0166 5
A software error involving fi nisher control was detected in the engine power supply control module.
A software error involving image generation control was detected in the engine power supply control
0166 6
module.
0168 1
Page information buffer FULL error
0168 2 Paper leading edge was detected without page control command.
0168 3
Paper tail edge was detected without page control command.
0168 4
Paper tail edge was detected before the leading edge was detected.
0168 5
Paper leading edge was detected before the tail edge was detected.
0170 1 Flash memory error 1: Could not acquire access rights for fl ash memory
0170 2
Flash memory error 2: Could not access the area for writing the adjustment value to fl ash memory
0170 3
Flash memory error 3: Unspecifi ed access ID for fl ash memory
0170 4 Flash memory error 4: An odd-numbered address was specifi ed for fl ash memory access.
0170 5
Flash memory error 5: An odd-numbered size was specifi ed for fl ash memory access.
0170 6
Flash memory error 6: An excessive size was specifi ed for fl ash memory access.
0170 7
Flash memory error 7: No free space in fl ash memory
0170 8 Flash memory error 8: Flash memory access could not be completed in time.
0170 9
Flash memory error 9: Flash memory write error
0171 1
Flash memory error 10: Could not read from fl ash memory shadow area
0171 2 Flash memory error 11: Could not write to fl ash memory shadow area
0171 3 Flash memory error 12: Write requested outside of fl ash memory
Error detecting that the resident processes of PMS is down
0173 1-8
Variation code:
1: NET-SS, 2: EXT-SS, 3: OPL-SS, 4: SYS-SS, 5: ENG-SS, 6: GCH-SS, 7: SEC-SS, 8: OS
0180 1-9
Exclusive access control error was detected in the Image Control module.
0223
The printer detected that the color parameters do not match the color mode for the printing image.
0246 The machine fi rmware version in the Controller does not match with that in the Engine Control PCB
[ 15-35 ]
Panel Messages