Riso ComColor X1 series Technical Manual page 660

Data Editing (D)
No. Process Name
MM Form Home Position
6102
Adjustment Pulse
MM Form Registration Motor Stop
6103
Timing
MM Form Horizontal Position
6104
Pulse
MM Form Horizontal Home
6105
Position Pulse
MM Form Horizontal Position
6106
Motor Speed Adjustment
MM Envelope Edge Detection
6131
Sensor Adjustment
MM Form Registration Motor
6133
Speed Adjustment 2
MM Form Horizontal Position
6134
Motor Waiting Time
MM Form Entrance Nip Motor
6135
Brake Time Adjustment
MM Flap Fold Motor Stop Time
6136
Adjustment
MM Gluing Motor Start Timing
6137
Adjustment
MM Gluing Plate Home Position
6138
Adjustment
MM Gluing Motor Brake Time
6139
Adjustment
MM Form Hit 3 Home Position
6143
Adjustment (235x120mm-3 fold)
MM Form Hit 3 Home Position
6145
Adjustment (162x229mm-3 fold)
MM Form Hit 3 Home Position
6146
Adjustment (US-3 fold)
MM Fold Hit 3 Backlash Correction
6147
Pulse
MM No Water Detection Timing
6148
Adjustment
MM Flap Fold Motor Brake Time
6150
Adjustment
MM Flap Fold Motor Stop Timing
6151
(235x120mm&US)
MM Flap Fold Motor Stop Timing
6152
(162x229mm)
6153 MM No Water Detect Timing
MM Transport Motors Stop Timing
6155
Adjustment
MM Ejection Elevation Motor
6156
Speed Adjustment
MM Ejection Elevation Motor Flap
6157
Timing Adjustment
OPTIONS / Mail Maker
Default Unit/Range Description
Pulse number for form fi ne adjustment on form home
502 443-564pulse
position movement.
Adjust a pulse number.
Rear edge of the form paper been detected by the MM
483 458-534pulse
Form Registration Sensor ↔ MM Form Registration Motor
stops after the form moved to horizontal position.
Adjust a pulse number.
Edge of the form paper been detected by the MM Form
23 12-116pulse
Edge Detection Sensor ↔ MM Form Horizontal Position
Motor stops.
Adjust a pulse number.
Edge of the form paper been detected by the MM Form
47 12-116pulse
Horizontal HP Sensor ↔ MM Form Horizontal Position
Motor stops.
2 1-6speed Adjust MM Form Horizontal Position Motor speed.
Adjust the envelope edge detection accuracy.
2048 0-4096
To adjust the compile position of the envelope.
Select the MM Form Registration Motor speed after form
5 5-6speed horizontal movement.
5: 5 speed, 6: 6 speed
70 20-100ms Adjust the start timing for horizontal movement.
100 80-120ms Adjust nip position and release position by this adjustment.
Adjust the MM Flap Fold Motor stop time on gluing
220 100-10000ms
operation.
Adjust time (stated below) on gluing operation.
32 1-100ms
MM Wrapping Fold Motor stop ↔ MM Gluing Motor start
Adjust time (stated below) on gluing operation.
21 1-100ms Shielding plate been detected by the MM Gluing HP
Sensor ↔ MM Gluing Motor start braking.
100 100-300ms Adjust the MM Gluing Motor brake time.
(-8879 - 10000)
0
pulse
Adjust home position of the MM Form Hit Plate 3 at home
(-2428 - 10000) position return operation.
0
pulse (Adjust home position movement stop timing of the MM
Form Hit Motor 3.)
(-8879 - 10000)
0
pulse
0 0-269pulse Adjust a number of pulse for backlash compensation.
Adjust continuous detection numbers of no water by the
10 1-16time
MM Water Level Detection Sensor.
100 100-300ms Adjust the MM Flap Fold Motor brake time.
95 50-150ms
Adjust the time.
Edge of the paper been detected by the MM Gluing
Sensor ↔ MM Flap Fold Motor stops
171 125-225ms
Adjust allowed paper ejection number after detection of
4000 0-5000time
[no water] by the MM Water Level Detection Sensor.
1000 0-2000ms Adjust an add time of last sheet ejection completion time.
Select the MM Ejection Elevation Motor speed ([mm/s])
7 1: speed 1 (80), 2: speed 2 (100), 3: speed 3 (120), 4: speed 4 (140), 5:
speed 5 (160), 6: speed 6 (180), 7: speed 7 (200)
700 0-2000ms Adjust the time to start pinning down the fl ap.
[ 16-117 ]
Test Modes
Rev.1.00