Riso ComColor X1 series Technical Manual page 468

Type S99: Software Error
!!System Error!!
Display Reboot by press the Sub Power Key
If recovery has failed, call service.
Clear
Turn OFF the printer. (Turn OFF the printer through sub power key.)
Point Description
Communication is impaired between the fi nisher system software and fi nisher unit.
3032 1
(ACK reception error 2)
Communication is impaired between the fi nisher system software and fi nisher unit.
3032 2
(Invalid ACK sequence bit 2)
Communication is impaired between the fi nisher system software and fi nisher unit.
3032 3
(No send buffer)
Communication is impaired between the fi nisher system software and fi nisher unit.
3032 4
(No receive buffer)
Communication is impaired between the fi nisher system software and fi nisher unit.
3032 5
(No reply from the Finisher)
Printing control system software interface error (1)
3033 1
Communication is impaired between the printing control system software and fi nisher system software
interface (sequence problem).
Printing control system software interface error (2)
3033 2
Communication is impaired between the printing control system software and fi nisher system software
interface (invalid parameters).
Printing control system software interface error (3)
3033 3
Communication is impaired between the printing control system software and fi nisher system software
interface (communication time-out).
3034
The fi nisher system software program is corrupted.
3035 Paper size setting was not possible.
3036 1 Possibility of software bug.
3036 2
Possibility of I/O register rewrote by the software.
3036 3
Possibility of Multi-Finisher power went OFF, or possibility of software bug.
3036 4 Possibility of Option PCB resetting due to loose cable.
3036 5
Possibility of I/O register rewrote by the software.
3036 6
Possibility of I/O register rewrote by the software.
3037 1
Possibility of software bug.
3037 2 Possibility of I/O register rewrote by the software
3037 3
Possibility of software bug.
3037 4
Possibility of Option PCB resetting due to loose cable.
3037 5 Possibility of I/O register rewrote by the software.
3037 6
Possibility of I/O register rewrote by the software.
Finisher System Software I/F error 1
3675
Software Process was made in wrong sequence.
Finisher System Software I/F error 2
3676
Error occured between Finisher System Software and Print Control System Software.
Finisher System Software received undefi ned error.
3677 1-5
Variation Code: 1-OST, 2-HCS, 3-MM, 4-PB, 5-HCF
Cannot perform program sheet reservation
3678 1-5
Variation Code: 1-OST, 2-HCS, 3-MM, 4-PB, 5-HCF
Communication error between the printer and Coin/Card vendor. < This error not applicable on your
5503
machine.>
Communication error between the printer and Coin/Card vendor. < This error not applicable on your
5504
machine.>
[ 15-37 ]
Panel Messages