Riso ComColor X1 series Technical Manual page 467

Panel Messages
Type S99: Software Error
!!System Error!!
Display Reboot by press the Sub Power Key
If recovery has failed, call service.
Clear
Turn OFF the printer. (Turn OFF the printer through sub power key.)
Point Description
One of sub-system failed during the transition to power-saving.
0284 1-4
Variation code indicates the sub-system in the PMS that reported an error.
One of sub-system failed during the transition to sleep-mode.
0285 1-4
Variation code indicates the sub-system in the PMS that reported an error.
One of sub-system failed during the transition to backlight-off-mode.
0286 1-4
Variation code indicates the sub-system in the PMS that reported an error.
One of sub-system failed during the transition to recovery from power saving mode.
0287 1-4
Variation code indicates the sub-system in the PMS that reported an error.
1155 1 Invalid logic detected in the paper feed tray class
1155 2
Undefi ned parameters detected in the paper feed tray class
1160 1
Wrong logic detection on the paper ejection tray class.
1160 2
Undefi ned parameter detection on the paper ejection tray class.
1302 Invalid parameters passed to SS controlling paper transfer (software bug)
1402
Failed to restore mirrored data
1404 1
Invalid parameters for restoring mirrored data were acquired by count control software.
1404 2 Invalid parameters for restoring paper size setting were acquired by count control software.
1404 3 Invalid parameters for acquiring the detailed count were acquired by count control software.
1404 4
Invalid parameters for acquiring the cleaning count were acquired by count control software.
1404 5
Invalid test mode parameters were acquired by count control software.
1415 Mechanical wake-up has failed.
Finisher System software interface error 1
3030 1 Communication is impaired between the printing control system software and fi nisher system software
interface (sequence problem).
Finisher system software interface error 2
3030 2 Communication is impaired between the printing control system software and fi nisher system software
interface (invalid parameters).
Communication is impaired between the fi nisher system software and fi nisher unit.
3031 1
(Communication sequence problem)
Communication is impaired between the fi nisher system software and fi nisher unit.
3031 2
(Invalid communication command)
Communication is impaired between the fi nisher system software and fi nisher unit.
3031 3
(Invalid communication parameters)
Communication is impaired between the fi nisher system software and fi nisher unit.
3031 4
(ACK reception error)
Communication is impaired between the fi nisher system software and fi nisher unit.
3031 5
(Invalid ACK sequence bit)
Communication is impaired between the fi nisher system software and fi nisher unit.
3031 6
(Invalid command sequence bit)
Communication is impaired between the fi nisher system software and fi nisher unit.
3031 7
(Command checksum error)
Communication is impaired between the fi nisher system software and fi nisher unit.
3031 8
(Invalid command length)
Communication is impaired between the fi nisher system software and fi nisher unit.
3031 9
(Invalid sync sequence command packet)
[ 15-36 ]