Riso ComColor X1 series Technical Manual page 509

Panel Messages
Type W172: Env Form Set Error (TRY1/SPX)
Display
Set envelope form in Feed tray1 so that the circle mark comes to the left front side.
Do one of the following.
• Place the paper on the paper tray 1.
Clear
• Press the Tray change button. (Select the tray other than the paper tray 1)
• Press the Cancel button.
• Delete the print job.
Point Description
After specify [Paper Tray 1] as [Mail form tray] in manually, it became the state of one of the following:
• There is no paper on the paper tray 1
3712 1-2
• There is no appropriate paper on the paper feed tray
(Mail form paper: Simplex paper transfer)
Type W173: Env Form Set Error (TRY1/DBL)
Display
Set envelope form in Feed tray1 so that the star mark comes to the right front side.
Do one of the following.
• Place the paper on the paper tray 1.
Clear
• Press the Tray change button. (Select the tray other than the paper tray 1)
• Press the Cancel button.
• Delete the print job.
Point Description
After specify [Paper Tray 1] as [Mail form tray] in manually, it became the state of one of the following:
• There is no paper on the paper tray 1
3713 1-2
• There is no appropriate paper on the paper feed tray
(Mail form paper: Duplex paper transfer)
Type W174: Env Form Set Error (TRY2/SPX)
Display
Set envelope form in Feed tray2 so that the circle mark comes to the left front side.
Do one of the following.
• Place the paper on the paper tray 2.
Clear
• Press the Tray change button. (Select the tray other than the paper tray 2)
• Press the Cancel button.
• Delete the print job.
Point Description
After specify [Paper Tray 2] as [Mail form tray] in manually, it became the state of one of the following:
• There is no paper on the paper tray 2
3714 1-2
• There is no appropriate paper on the paper feed tray
(Mail form paper: Simplex paper transfer)
Type W175: Env Form Set Error (TRY2/DBL)
Display
Set envelope form in Feed tray2 so that the star mark comes to the right front side.
Do one of the following.
• Place the paper on the paper tray 2.
Clear
• Press the Tray change button. (Select the tray other than the paper tray 2)
• Press the Cancel button.
• Delete the print job.
Point Description
After specify [Paper Tray 2] as [Mail form tray] in manually, it became the state of one of the following:
• There is no paper on the paper tray 2
3715 1-2
• There is no appropriate paper on the paper feed tray
(Mail form paper: Duplex paper transfer)
[ 15-78 ]