Riso ComColor X1 series Technical Manual page 897

Multifunction Finisher II (option)
(5) Remove 1 E-ring from the Folding Roll and 3 E-rings from the Pre-Folding Roll.
Dismount the four bearings.
(6) Repeat the same removal procedure on the FRONT of the unit.
(7) Remove the E-ring on the FRONT of the unit and dismount the gear, Pre-Folding Roll Lever, Spacer, and
Folding Roll Lever.
Pre-Folding Roll Lever
(8) Remove the Folding Roll and Pre-Folding Roll.
> For both pairs of rollers, the roller with the flanged metal shaft should be positioned on the top.
Pre-Folding Roll
Folding Roll
Remove E-ring and remove the gear
[ 24-82 ]
Remove 4 E-rings and 4 bearings
Folding Roll Lever
x1 series ComColor (Revision 0.9)