Overview; Structure Of Multifunction Finisher - Riso ComColor X1 series Technical Manual

Multifunction Finisher II (option)

Overview

1. Structure of Multifunction Finisher

I/F Module (Transfer section)
• The Interface Module (I/F module) connects the Multipurpose Finisher to the ComColor printer and transports
the paper.
Multipurpose Finisher
• The Multipurpose Finisher can be separated into two sections. The left-hand section consists of above
mentioned I/F Module.
• The right-hand section consists of the following.
Puncher, Stapler, Top-Tray, Stacker-Tray and Saddle stitching finisher (Booklet section).
Saddle Stitching Finisher
• The Saddle Stitching Finisher is a Booklet section of the Multipurpose Finisher for folding paper sheets in half
(2-fold) and stapling at the center, if the stapling function is selected, to produce booklets.
• Paper discharged from this Booklet section is discharged onto the Booklet Tray.
Multipurpose Finisher
I/F Module
Stacker Tray
Top Tray
[ 24-2 ]
Stapler
Puncher
Booklet Tray
Saddle Stitching Finisher
< Booklet Section >
x1 series ComColor (Revision 0.9)