Table of Contents
Advertisement
40
40
Chapter 3 Working with the Printer Driver
Chapter 3 Working with the Printer Driver
Sending and Printing Data
Follow the procedures below to print out document data directly on your RISO printer.
If the corresponding RISO Printer Driver has not been installed in your computer yet, install it first while referring to the
section "Installing the Printer Driver"
B The maximum print area is different depending on the RISO printer model. To confirm the maximum print area of
your document, consult the user's guide of your RISO printer.
B For other limitations, also read the user's guide of your RISO printer.
1
Turn on your RISO printer and load paper.
Load the proper paper to be printed.
2
Specify the print job in the [Print] dialog.
Turn on your computer and start Windows.
Open the document file to be printed, select [Print] in the [File] menu to open the [Print] dialog.
3
Select a Printer Driver.
Select a Printer Driver that supports your printer from the [Select Printer] list.
B To print from a USB flash drive, select [Printer Name (USB)] and connect the USB flash drive to your
computer.
BTo use [Paper Memory Print] while the printer is not connected via cable, select the driver for Paper Memory
Print of your printer.
4
Set the number of copies.
Specify the number of copies within the following range : 1 to 9,999.
● Be sure to deselect [Collate]. If it is selected, the master-making process will be repeated for every copy.
B If you want to print a file consisting of several pages, and the file includes different paper sizes or paper
directions, printing may fail when you choose [All] for the paper range. Specify page numbers for those of
same paper size or direction.
(A
10).
Deselect [Collate].
Advertisement
Table of Contents
