Riso ComColor X1 series Technical Manual page 648

Unit Checking (U)
3494 OST Tray Elevation Motor
Up/down is 1 cycle. Complete 1 cycle then stops automatially.
3495 OST Tray Shift Motor
Move to Rear side then Front side is 1 cycle. Complete 1 cycle then stops automatially.
3496 OST Staple Unit Clinch Action
Continuous clinch action of the Stapler Unit.
3497 OST Rake Roller Elevation Solenoid
Continuous ON/OFF action of the OST Rake Roller Elevation Solenoid.
3498 OST Stapler Protect Lever IN/OUT Action
Continuous IN/OUT action of the OST Stapler Protect Lever.
3499 OST Elevator Continuous Action
Perform elevating operation of the OST elevator continuously.
One cycle operation (Lower the elevator fi rst and then lift the elevator).
Perform 1 cycle operation and then stops automatically.
5-5-4. Initialization (I) - Not available
5-5-5. Data Monitoring (C)
Data Monitoring (C)
No. Process Name
3616 OST Firmware Version
3617 OST Loader Version
3622 OST Paper Feed Number
3623 OST Staple Job Number
3624 OST Paper Feed Total Numbers
3625 OST Staple Job Total Numbers
3626 OST Staple Movement Number
OPTIONS / Offset Staple Tray
Upper: No./Process Name, Lower: Description
Confi rmation Items/Description
Displays the OST fi rmware version.
Displays the OST loader version.
Displays a number of the paper ejected on the offset staple tray.
(Accumulated number since the last counter clear.)
Displays a number of the staple job on the offset staple tray.
(Accumulated number since the last counter clear.)
Displays a number of the paper ejected on the offset staple tray.
(Accumulated number since factory shipment)
Displays a number of the staple job on the offset staple tray.
(Accumulated number since factory shipment)
Displays number of stapler movement of Offset Staple Tray.
(Stapler cable movement)
[ 16-105 ]
OPTIONS / Offset Staple Tray
Test Modes
Rev.1.00