Internal Paper Feed Rollers 1, 2 And/Or - Riso ComColor X1 series Technical Manual

Registration Section
2-9. Internal Paper Feed Rollers 1, 2 and/or 3. (Scraper and Pickup Rollers)
1. Turn OFF the machine power and disconnect the power cable from the power source.
2. Pull out and remove all three Internal Paper Feed Trays from the machine.
3. Remove the Scraper and Pickup rollers from the appropriate Internal paper feed unit. (1 plastic clip per roller.)
Note: Both rollers contain one-way bearing. Make sure to mount the rollers facing in the correct direction.
The side with the one-way
bearing faces towards the
front of the machine (faces
towards the Plastic clip).
< Scraper & Pickup Roller >
- same part -
[ 5-22 ]
The side with only the plastic
core faces the rear of the
machine. (This side goes into
the shaft first.)
Plastic clip
Scraper roller
Pickup roller
Stripper plate
Stripper holder
Stripper angle adjustment dial
Stripper pressure release lever
ComColor Series (Revision 2.4)