Riso ComColor X1 series Technical Manual page 490

Type W33: Puncher unit not available
Job name: ( )
Display This printing job is not acceptable because the fi nisher punching unit is faulty.
Printing without using the stapling unit is possible. (The job has been cancelled.)
Do one of the following.
Clear • Press the Close button.
• Delete the job.
Point Description
3238
A job was sent specifying punching, but the puncher unit cannot be used on the fi nisher.
Type W34: Top tray not available
Job name: ( )
Display
This printing job is not acceptable because the fi nisher top tray is faulty.
Printing without using the stapling unit is possible. (The job has been cancelled.)
Do one of the following.
Clear
• Press the Close button.
• Delete the job.
Point Description
3239
A job was sent specifying use of the top tray, but the top tray cannot be used on the fi nisher.
Type W35: Stacking tray not available
Job name: ( )
Display
This printing job is not acceptable because the fi nisher stacking tray is faulty.
Printing without using the stapling unit is possible. (The job has been cancelled.)
Do one of the following.
Clear
• Press the Close button.
• Delete the job.
Point Description
3240 A job was sent specifying use of the stacking tray, but the stacking tray cannot be used on the fi nisher.
Type W36: Booklet tray not available
Job name: ( )
Display
This printing job is not acceptable because the fi nisher booklet unit is faulty.
Printing without using the stapling unit is possible. (The job has been cancelled.)
Do one of the following.
Clear
• Press the Close button.
• Delete the job.
Point Description
3241 A job was sent specifying use of the booklet tray, but the booklet tray cannot be used on the fi nisher.
Type W37: 3-fold tray not available
Job name: ( )
Display This printing job is not acceptable because the fi nisher 3-fold tray is faulty.
Printing without using the stapling unit is possible. (The job has been cancelled.)
Do one of the following.
Clear • Press the Close button.
• Delete the job.
Point Description
3242
A job was sent specifying use of the 3-fold tray, but the 3-fold tray on the fi nisher is not available.
[ 15-59 ]
Panel Messages