Riso ComColor X1 series Technical Manual page 514

Type X06: Paper jam in duplex switchback entry section
Display
Paper has jammed. A button appears in the jam. Touch the button to view the removal method.
Clear
See pages 15-7, paper jam errors.
Point Description
1061 Paper being transferred did not reach the upper transfer OUT sensor in time, based on the transfer speed.
1062
Paper being transferred did not reach the switchback sensor in time, based on the transfer speed.
1081
Paper being transferred did not pass the upper transfer OUT sensor in time, based on the transfer speed.
1119 Paper was still at the upper transfer OUT sensor when paper transfer began.
Type X07: Paper jam in switchback section
Display
Paper has jammed. A button appears in the jam. Touch the button to view the removal method.
Clear See pages 15-7, paper jam errors.
Point Description
1082
Paper being transferred did not pass the switchback sensor in time, based on the transfer speed.
1120
Paper was still at the switchback sensor when paper transfer began.
Type X08: Paper jam in re-feed unit
Display
Paper has jammed. A button appears in the jam. Touch the button to view the removal method.
Clear See pages 15-7, paper jam errors.
Point Description
1052
Re-fed paper did not reach the registration sensor in time, based on the transfer speed.
1063 Paper being transferred did not reach the re-feed sensor in time, based on the transfer speed.
1066
Paper fed from High Capacity Feeder did not pass the registration sensor in time, based on the transfer speed.
1072
Re-fed paper did not pass the registration sensor in time, based on the transfer speed.
1083
Paper being transferred did not pass the re-feed sensor in time, based on the transfer speed.
1121 Paper was still at the re-feed sensor when paper transfer began.
Type X09: Paper jam in tray 1
Display
Paper has jammed. A button appears in the jam. Touch the button to view the removal method.
Clear See pages 15-7, paper jam errors.
Point Description
1056
Paper being transferred did not reach vertical paper feed sensor 4 in time, based on the transfer speed.
1114
Paper was still at vertical paper feed sensor 4 when paper transfer began.
Type X10: Paper jam in tray 2
Display Paper has jammed. A button appears in the jam. Touch the button to view the removal method.
Clear
See pages 15-7, paper jam errors.
Point Description
1054 Paper being transferred did not reach vertical paper feed sensor 2 in time, based on the transfer speed.
Type X11: Paper jam in vertical path, upper section
Display
Paper has jammed. A button appears in the jam. Touch the button to view the removal method.
Clear See pages 15-7, paper jam errors.
Point Description
Internally fed paper did not reach the registration sensor in time, based on the transfer speed.
1051 1-3
1-<Paper feed from Tray No.1>, 2-<Paper feed from Tray No.2>, 3-<Paper feed from Tray No.3>
Internally fed paper did not pass through the registration sensor in time, based on the transfer speed.
1071 1-3
1-<Paper feed from Tray No.1>, 2-<Paper feed from Tray No.2>, 3-<Paper feed from Tray No.3>
1076
Paper being transferred did not pass through vertical paper feed sensor 4 in time, based on the transfer speed.
Paper being transferred did not pass through vertical paper feed sensor 5 in time, based on the transfer speed.
1077 1-3
1-<Paper feed from Tray No.1>, 2-<Paper feed from Tray No.2>, 3-<Paper feed from Tray No.3>
1115 Paper was still at vertical paper feed sensor 5 when paper transfer began.
[ 15-83 ]
Panel Messages