Riso ComColor X1 series Technical Manual page 449

Panel Messages
Type S35: Ink supply unit error
!!System Error!!
Display Reboot by press the Sub Power Key
If recovery has failed, call service.
Clear
Turn OFF the printer. (Turn OFF the printer through sub power key.)
Point Description
The K ink detection sensor ON/OFF detection cycle on the K ink negative pressure ink tank was detected
2079 1
too long when the machine detected no K ink.
<Refer to Test Mode No. 1534 for temporary error clear.>
The C ink detection sensor ON/OFF detection cycle on the C ink negative pressure ink tank was detected
2079 2
too long when the machine detected no C ink.
<Refer to Test Mode No. 1534 for temporary error clear.>
The M ink detection sensor ON/OFF detection cycle on the M ink negative pressure ink tank was detected
2079 3
too long when the machine detected no M ink.
<Refer to Test Mode No. 1534 for temporary error clear.>
The Y ink detection sensor ON/OFF detection cycle on the Y ink negative pressure ink tank was detected
2079 4 too long when the machine detected no Y ink.
<Refer to Test Mode No. 1534 for temporary error clear.>
The ink detection sensor on the K pressurized ink tank was detected OFF for too long of a period during the
2081 1 ink circulation action when the machine detected no K ink after the Strong head cleaning.
<Refer to Test Mode No. 1534 for temporary error clear.>
The ink detection sensor on the K pressurized ink tank was detected OFF for too long of a period during the
2081 2 ink circulation action when the machine detected no K ink (excludes after the Strong head cleaning action).
<Refer to Test Mode No. 1534 for temporary error clear.>
The ink detection sensor on the C pressurized ink tank was detected OFF for too long of a period during the
2082 1
ink circulation action when the machine detected no C ink after the Strong head cleaning.
<Refer to Test Mode No. 1534 for temporary error clear.>
The ink detection sensor on the C pressurized ink tank was detected OFF for too long of a period during the
2082 2
ink circulation action when the machine detected no C ink (excludes after the Strong head cleaning action).
<Refer to Test Mode No. 1534 for temporary error clear.>
The ink detection sensor on the M pressurized ink tank was detected OFF for too long of a period during
2083 1
the ink circulation action when the machine detected no M ink after the Strong head cleaning.
<Refer to Test Mode No. 1534 for temporary error clear.>
The ink detection sensor on the M pressurized ink tank was detected OFF for too long of a period during the
2083 2
ink circulation action when the machine detected no M ink (excludes after the Strong head cleaning action).
<Refer to Test Mode No. 1534 for temporary error clear.>
The ink detection sensor on the Y pressurized ink tank was detected OFF for too long of a period during the
2084 1
ink circulation action when the machine detected no Y ink after the Strong head cleaning.
<Refer to Test Mode No. 1534 for temporary error clear.>
The ink detection sensor on the Y pressurized ink tank was detected OFF for too long of a period during the
2084 2 ink circulation action when the machine detected no Y ink (excludes after the Strong head cleaning action).
<Refer to Test Mode No. 1534 for temporary error clear.>
The ink detection sensor on the K negative pressurized ink tank was detected OFF for too long of a period
2085 1
during the ink circulation action when the machine detected no K ink.
The ink detection sensor on the C negative pressurized ink tank was detected OFF for too long of a period
2085 2
during the ink circulation action when the machine detected no C ink.
The ink detection sensor on the M negative pressurized ink tank was detected OFF for too long of a period
2085 3
during the ink circulation action when the machine detected no M ink.
The ink detection sensor on the Y negative pressurized ink tank was detected OFF for too long of a period
2085 4
during the ink circulation action when the machine detected no Y ink.
[ 15-18 ]