Panel Messages
6-2. Requirements to Clear Jams in various options
If paper jams occur in the various option or in some parts involved in ejection by the printer, an error such as the
one shown below is displayed on the panel. Promptly clear the jam by pressing one of the numbers of groups
1–4 and following the instructions. (The corresponding procedures are identifi ed in the following table.)
6-2-1. Requirements to Clear Jams in Offset Stapler
Button in
Group Point
Display
OST-1
C1
M
OST-2
C2
M/Q
6-2-2. Requirements to Clear Jams in High Capacity Feeder
Button in
Group Point
Display
HCF-1
P1
N
HCF-2
P2
R
HCF-3
P3
R
[M] Paper jam has been cleared + (Close button has been pressed or all covers has
been closed)
[M], [Q] Paper jam has been cleared + (Close button has been pressed or all covers
has been closed)
P1
High Capacity Feeder
[N] Paper jam has been cleared + (Close button has been pressed or all covers has
been closed)
[R] Paper jam has been cleared + (Close button has been pressed or all covers has
been closed)
[R] Paper jam has been cleared + (Close button has been pressed or all covers has
been closed)
[ 15-108 ]
C1
C2
Requirement to Clear Jam
P3
P2
Printer Unit
Requirement to Clear Jam