Riso ComColor X1 series Technical Manual page 820

Punching
1) This function creates holes in each sheet before discharge.
2) If only the punching function is set, punched sheets can be discharged onto the Top Tray or Stacker Tray.
Binding margin
1) This function provides a margin for punching or stapling.
2) The margin can be set to a value of between 0 and 50 mm.
3) When the "auto size reduction" function is set, the image printed will be scaled to fit the print area excluding
the binding margin. If the "auto size reduction" function is not set and the image to be printed extends beyond
the print area, the sections outside the print area will not be printed.
2-fold
1) This function folds each sheet in half before discharge.
2) Folded paper is discharged onto the Booklet Tray.
3) Printing on the outside or inside surface of paper is possible.
2-3. Combinations of functions
Paper sizes and compatible functions
Post
Card
Stapling (one location
in front.)
Stapling (one location
in back, angled.)
Stapling (one location
in back, parallel.)
Stapling (two locations
in center.)
No stapling + offset
output
2-hole punching
4-hole punching
2-fold
Combinations of functions
2-fold
Punching
Function
Stapling
Booklet
B5 B5 A4
SEF LEF SEF LEF
Function
2-fold Punching
[ 24-5 ]
Paper Size
A4 B4 A3 LETTER
SEF SEF SEF
Stapling Booklet Top tray
Multifunction Finisher II (option)
LETTER LEGAL LEDGER
LEF
SEF
Paper Ejection Tray
Stacking Booklet
Tray Tray
x1 Series ComColor (Revision 0.9)
SEF