Riso ComColor X1 series Technical Manual page 343

GDI Controller
Logout Admin
Admin. Settings
To finish, press the MODE key.
Print Admin settings
Initialize
Non RISO ink setting
Stock Management
Network setting (IPv4)
Network setting (IPv6)
All User ctrl
Network setting (IPv4)
Printer name
RISO PRINTER
DHCP server
IP address
Subnet mask
Gateway address
Network setting (Details)
Proxy DNS(IPv4)
Not Use
Address
0. 0. 0. 0
Port
User name
Password
Network setting (IPv6)
Printer name
RISO PRINTER
Manual
IP address
0000:0000:0000:0000:0000:0000:0000:0000
Gateway address
0000:0000:0000:0000:0000:0000:0000:0000
Rev.1.00
0. 0. 0. 0
0000:0000:0000:0000:0000:0000:0000:0000
System Printer
Not Use
0
0
0 0
0
0
DNS(IPv6) WINS
Use
8080
Stateless address
K C M Y
5/9
Scanner
OK
Cancel
Use
0
0
0
0
0
0
OK
Cancel
Others
Cancel OK
Stateful address
Prefix length
/
64
[ 13-6 ]
Select Network setting in the menu.
There are two IP address system
supported by the printer.
[Network setting (IPv4)]
[Network setting (IPv6)]
One is IPv4 system, it has been
supported since before.
Basically, sets 3 kind of information
(IP address, Subnet mask and
Default gateway).
Select whether to use a DHCP
server for automatic data acquisition
When DHCP is not used, enter the
IP address and Subnet mask, and
if a router is installed on-site, enter
the router IP address in Gateway
address.
Also, in the [Network setting (Details)]
setting menu, Proxy, WINS, or DNS
server information can be set.
If the customer place utilized with
IPv6 IP address system, need to set
IPv6 network setting instructed by
the administrator.
Manual: Enter IP address and
Gateway address manually.
Stateless address: One of auto-
confi guration (Automatically
confi gure by communicating between
the host and the router (IPv6) in the
network.)
Stateful address: One of auto-
confi guration (Automatically
confi gure by the DHCP server (IPv6)
in the network.)