Riso ComColor X1 series Technical Manual page 874

4-5. Removing the Compile Unit
(1) Separate the wires connected to the Compile Unit.
(2) Remove the clip from the pulley, detach the pulley, and take off the belt.
Undo wires from
these clamps
(3) Loosen the Tensioner retaining screw and remove the belt.
Tensioner retaining screw
Tensioner
Remove this belt
[ 24-59 ]
Multifunction Finisher II (option)
Unplug these
two intermediate
connectors
Undo wires from
this wire clamp
x1 Series ComColor (Revision 0.9)