Riso ComColor X1 series Technical Manual page 525

Panel Messages
Type Z06: Switchback cover open
Display
Close the jam release cover (G).
Clear
Close the switchback cover.
Point Description
1213 The switchback cover is open.
Type Z08: Check paper feed tray
Safety SW on Standard Tray is activated.
Display
Reset paper on Standard Tray.
Clear
Release interlock.
Point Description
1090 The upper or lower paper feed tray interlock switch is deactivated.
Type Z09: Tray 1 not loaded
Display Set Feed Tray 1 in place.
Clear
Close internal paper feed tray 1.
Point Description
1007
Internal paper feed tray 1 is open.
Type Z10: Tray 2 not loaded
Display Set Feed Tray 2 in place.
Clear
Close internal paper feed tray 2.
Point Description
1008 Internal paper feed tray 2 is open.
Type Z11: Tray 3 not loaded
Display
Set Feed Tray 3 in place.
Clear
Close internal paper feed tray 3.
Point Description
1009
Internal paper feed tray 3 is open.
Type Z16: Left fi nisher cover open
Display
Close the fi nisher door.
Clear Deactivate the interface module front door switch.
Point Description
3121
The printer has detected that the interface unit cover is open.
Type Z17: Booklet unit not connected
Display
Close the fi nisher booklet tray.
Clear Set the booklet drawer in place.
Point Description
3122
Booklet drawer open
Type Z18: Right fi nisher cover open
Display Close the fi nisher door.
Clear
Deactivate the fi nisher front door switch.
Point Description
3123 Finisher front cover open
Type Z20: 3-fold tray not loaded
Display
Close the fi nisher 3-fold tray.
Clear
Load the 3-fold tray.
Point Description
3124 The 3-fold tray is not loaded (it is pulled out).
[ 15-94 ]