Riso ComColor X1 series Technical Manual page 445

Panel Messages
Type S07: Ink low-temperature error
!!System Error!!
Display Reboot by press the Sub Power Key.
If recovery has failed, call service.
Details in Common Head thermistors have detected that the ink is lower than the specifi ed temperature.
Clear
Turn OFF the printer. (Turn OFF the printer through sub power key.)
Point Description
2170-2175 Black #1-6 head
2176-2181
Cyan #1-6 head
2182-2187
Magenta #1-6 head
2188-2193 Yellow #1-6 head
Type S10: Internal paper feed error
The Paper feed tray has an error.
Display Press RESET key or Reboot by press the Sub Power Key
If recovery has failed, call service.
Clear Turn OFF the printer. (Turn OFF the printer through sub power key.)
Point Description
1035
Internal paper feed motor locked error
1036
Vertical paper feed motor locked error
Type S11: Paper feed motor locked
The Standard tray has an error.
Display
Press RESET key or Reboot by press the Sub Power Key
If recovery has failed, call service.
Clear
Turn OFF the printer. (Turn OFF the printer through sub power key.)
Point Description
1034 External paper feed motor locked error
1037 Registration motor locked error
Type S12: Paper ejection motor locked
!!System Error!!
Display
Press RESET key or Reboot by press the Sub Power Key
If recovery has failed, call service.
Clear
Turn OFF the printer. (Turn OFF the printer through sub power key.)
Point Description
1043
FD paper ejection motor locked error
1044
FU paper ejection motor locked error
When the paper ejection fence is moving to home position and the HP sensor is activated, the fence pulse
1215
motor is not stopped in time.
When the paper ejection fence is moving to home position and the HP sensor is deactivated, the fence
1216
pulse motor is not stopped in time.
When the paper ejection fence is moving to home position and the HP sensor is activated at the auto start
1217
position, the fence pulse motor is not stopped in time.
When the paper ejection fence is moving to the specifi ed position, the fence pulse motor is not stopped in
1218
time.
When the paper ejection wing is moving to home position and the HP sensor is activated, the wing pulse
1220
motor is not stopped in time.
When the paper ejection wing is moving to home position and the HP sensor is deactivated, the wing pulse
1221
motor is not stopped in time.
When the paper ejection wing is moving to home position and the HP sensor is activated at the auto start
1222
position, the wing pulse motor is not stopped in time.
When the paper ejection wing is moving to the specifi ed position, the wing pulse motor is not stopped in
1223
time.
[ 15-14 ]