Riso ComColor X1 series Technical Manual page 617

Test Modes
Data Editing (D)
No. Process Name
4783 Z-Fold 1 8K
4784 Z-Fold 2 A3
4785 Z-Fold 2 11X17
4786 Z-Fold 2 B4
4787 Max Bi-Folding
4788 Z-Fold 1 8K
4789 Envelope-Card Fold 1 A4SEF
4790 Envelope-Card Fold 1 85X11SEF
4791 Envelope-Card Fold 2 A4SEF
4792 Envelope-Card Fold 2 85X11SEF
4793 Paper Add Feed Adjustment
4794 Roll Nip Timing
4796 Z-Fild Stacker Tray Setting B4S
4797 Z-Fold Limit Stacking Tray B4S
4798 Z-Fold Limit Top Tray
4799 Sub Paddle Timing (Thin paper)
4800 Z-Fold Limit Stacking Tray A3
4801 Roll Nip Timing Z
Rev.1.00
OPTIONS / Finisher
Default Unit/Range
50 10-90
50 10-90
50 10-90
50 10-90
1 1-15
50 10-90
50 10-90
50 10-90
50 10-90
50 10-90
18 0-36
21 2-48
150 0-255sheet
20 0-255sheet
20 0-20sheet
8 1-48
30 2-255sheet
21 2-48
[ 16-74 ]
Description
Adjusts the roller position when the fi rst fold is
made during z-folding, and adjusts the position
where the leading edge of paper stops.
Adjusts the roller position when the second
fold is made during z-folding, and adjusts
the position where the leading edge of paper
stops.
Adjusts the roller position when the second
fold is made during z-folding, and adjusts
the position where the leading edge of paper
stops.
Adjusts the roller position when the second
fold is made during z-folding, and adjusts
the position where the leading edge of paper
stops.(1=0.1mm)
The maximum quantity of sheets folded when
bi-folding at the time of booklet ejection.
Adjusts the roller position when the second
fold is made during z-folding, and adjusts
the position where the leading edge of paper
stops.(1=0.1mm)
Adjusts the roller position when the fold is
made during envelope c-folding, and adjusts
the position where the leading edge of paper
stops.(1=0.1mm)
Adjusts the roller position when the fold is
made during envelope c-folding, and adjusts
the position where the leading edge of paper
stops.(1=0.1mm)
Adjusts the roller position when the fold is
made during envelope c-folding, and adjusts
the position where the leading edge of paper
stops.(1=0.1mm)
Adjusts the roller position when the fold is
made during envelope c-folding, and adjusts
the position where the leading edge of paper
stops.(1=0.1mm)
Adjusts the amount of paper feeding (amount
from when paper touches the end guide until
the motor stops).(1=0.5mm)
Time after nip release (100 ms activated) until
nip.
Adjusts the timing of skew adjustment roller
nip release.(1=10ms)
Specifi es the quantity of sheets of the other
size ejected for subtraction of the quantity of
z-fold sheets of B4SEF ejected in the stacker
tray.
Stacking limit quantity of z-fold B4SEF sheets
ejected in the stacking tray.
Z-fold ejected sheet limit, top tray
For lightweight paper, 182 mm or shorter in the
direction of transfer and 257 mm or narrower
in width (B5LEF or smaller),
adjusts the timing of sub paddle support
operation. (1=2.5ms)
Stacking limit quantity of z-fold A3SEF and
11x17 SEF sheets ejected in the stacking tray.
When using A3SEF, 1111x17 SEF, B4SEF, and
8K SEF: the time after nip release (100 ms
activated) until nip.
Adjusts the timing of skew adjustment roller
nip release.(1=10ms)