Removal Of Covers - Riso ComColor X1 series Technical Manual

7. Removal of covers

• Refer to the following diagram for the removal of external covers.
• Some covers cannot be removed unless other covers are detached first. For details, refer to the removal
directions for individual covers.
(4) Eject Cover
(6) Stacker Lower Cover
(2) I/F Module Rear Cover
(1) Finisher Rear Cover
(1) Finisher Rear Cover: 4 screws
(2) I/F Module Rear Cover: 3 screws
(3) Finisher Rear Upper Cover: 2 screws
(4) Eject Cover: 4 screws
(5) Top Tray: 1 screw
Remove in the order of (4) → (5).
(6) Stacker Lower Cover: 6 screws
Remove (1) and then (4) → (5) → (9) → (10) prior to removing (6).
(5) Top Tray
[ 24-19 ]
Multifunction Finisher II (option)
(3) Finisher Rear Upper Cover
- go to next page -
x1 Series ComColor (Revision 0.9)