Riso ComColor X1 series Technical Manual page 303

Ink Flow Section
15) Put the controller PCB box in maintenance position. (Refer to the section on covers in Chapter 2.)
16) Remove the paper elevation motor. (Refer to paper transfer section information in Chapter 8.)
17) Remove the stay plate next to the paper elevation unit. (IT screw 4x8 (2 pcs))
Paper elevation unit
Stay plate
18) Remove the paper elevation unit. (Refer to paper transfer section information in Chapter 8.)
19) Remove the right head holder cover. (IT screw 3x6 (6 pcs))
Right head holder cover
[ 11A-91 ]
ComColor Series (Revision 2.4)