Riso ComColor X1 series Technical Manual page 503

Panel Messages
Type W106: Cannot Execute Mail Creation
Job name: ( )
Display This printing job is not acceptable because mail maker is unavailable.
Printing without using the mail maker is possible. (The job has been deleted).
Clear
Press the Close button or Delete the job
Point Description
0289
The job for creating mail was sent when the Mail Maker option is not ready.
Type W108: HCS Tray Full Detection
Display
The High capacity stacker is full. Remove the paper.
Do one of the following.
• Press the Cancel button.
Clear
• Delete the print job.
• Delete the Continue button.
Point Description
3624
At the paper ejection, HCS elevator height reach to specifi ed height, and detected the full on the tray.
Type W109: MM Letter Number Limit Error
Insert No. (permutation)
Display This job cannot be done due to the maximum number of inserts exceeded.
Check the data. (The job has been deleted.)
Clear
Press Close button.
Point Description
3645
There is exceeded limitation of number of inserts for the envelope.
Type W110: Original Not Suitable, No Size
Insert No. (permutation)
Display Insert data with a size different from the specifi ed size has been found.
Check the settings. (The job has been deleted.)
Clear Press Close button.
Point Description
3646
There is different size of inserts for the envelope.
Type W115: Option Power Off Error
The output device has not been powered on.
Display
To use the optional device, power on the optional device and then the main unit.
Do one of the following.
Clear
• Press the Close button. (The option is disable but the printer can be used.)
• Power OFF the printer sub power, Power ON the option, Power ON the printer sub power (in order)
Point Description
5516 Switch ON the printer main power switch (Sub-power is OFF), when the MM or the PB option is connected.
Type W116: Original Not Suitable, No Data
Display
Insert data is missing. Check the data. (The job has been deleted.)
Clear Press Close button.
Point Description
3656
The number of the envelope exceed with the number of the inserts of the envelope.
Type W117: EF Envelope Size Error
Envelope form data with a size different from the specifi ed size was found.
Display
Check the settings. (The job has been deleted.)
Clear
Press Close button.
Point Description
3657 Unrecognized envelope form size detected.
[ 15-72 ]