Riso ComColor X1 series Technical Manual page 527

Panel Messages
Type Z52: Offset Stapler jam cover open
Display
Close the Transfer Cover of Offset stapler.
Clear
Close OST jam cover
Point Description
3423 Undetermined
Type Z53: Offset Stapler staple cover open
Display Close the Staple Cover of the Offset stapler.
Clear
Close OST staple needle cover
Point Description
3424 Undetermined
Type Z54: High capacity feeder error
Display Close the cover of High capacity feeder.
Clear
Release interlock.
Point Description
HCF Jam Release Door Lock Detection Sensor 1 or HCF Jam Release Door Lock Detection Sensor 2 on HCF
2561
is deactivated.
Type Z55: MM Cover Open Error
Display Close the mail maker cover.
Clear
Close the cover
Point Description
3536
Mail Maker cover is open
Type Z56: PB Front Cover Open
Display
Close the front cover of the perfect binder.
Clear Close the front cover
Point Description
3556
PB front cover is open
Type Z57: HCS Left Cover Open
Display
Close the left cover of "High capacity stacker".
Clear
Close HCS left cover
Point Description
3626
HCS Front Door 1 Safety Switch is OFF
Type Z58: HCS Carriage Set Error
Display
Set the high capacity stacker carriage.
Clear
Install the Hand Truck, then close the HCS door
Point Description
3863
The Hand Truck was not installed correctly when HCS unit connected.
Type Z59: HCS Ejection Tray Set Error
Display
The high capacity stacker stacking tray is not set. Set the stacking tray.
Clear
Install the paper receiving tray, then close the HCS door
Point Description
3861
Detected no HCS tray when raise the tray. (HCS Tray Set Sensor is OFF)
[ 15-96 ]