Riso ComColor X1 series Technical Manual page 484

Type W04: No paper loaded (paper feed tray)
Load paper in the Standard tray.
(1)(2)
Display
Note: The paper size is indicated in position (1) and the type of paper in parentheses in position (2). Example:
A4 (Standard)
Do one of the following.
• Load paper of any size in a paper feed tray.
Clear
• Press the Change tray button and switch the paper feed tray to the other tray.
• Press the Cancel button.
• Delete the job.
Point Description
The feed tray for the job has been manually selected and any of the following conditions applies when paper
transfer from the paper feed tray begins.
• The paper feed tray is empty.
1000 1-2
• Paper of a size compatible with specifi ed fi nisher functions is not loaded in the paper feed tray.
Variation code: 1: Error detected by controller or related components; 2: Error detected by engine or related
components
Type W05: No paper loaded (tray 1)
Load paper in Feed Tray 1.
(1)(2)
Display
Note: The paper size is indicated in position (1) and the type of paper in parentheses in position (2). Example:
A4 (Standard)
Do one of the following.
• Load paper of any size in tray 1.
Clear • Switch the paper feed tray to a tray other than tray 1.
• Press the Cancel button.
• Delete the job.
Point Description
The feed tray for the job has been manually selected and any of the following conditions applies when paper
transfer from tray 1 begins.
• Tray 1 is empty.
1001 1-2
• Paper of a size compatible with specifi ed fi nisher functions is not loaded in tray 1.
Variation code: 1: Error detected by controller or related components; 2: Error detected by engine or related
components
Type W06: No paper loaded (tray 2)
Load paper in Feed Tray 2.
(1)(2)
Display
Note: The paper size is indicated in position (1) and the type of paper in parentheses in position (2). Example:
A4 (Standard)
Do one of the following.
• Load paper of any size in tray 2.
Clear • Switch the paper feed tray to a tray other than tray 2.
• Press the Cancel button.
• Delete the job.
Point Description
The feed tray for the job has been manually selected and any of the following conditions applies when paper
transfer from tray 2 begins.
• Tray 2 is empty.
1002 1-2
• Paper of a size compatible with specifi ed fi nisher functions is not loaded in tray 2.
Variation code: 1: Error detected by controller or related components; 2: Error detected by engine or related
components
[ 15-53 ]
Panel Messages