Riso ComColor X1 series Technical Manual page 519

Panel Messages
Type X54: MM Paper Jam
Display
Paper has jammed. A button appears in the jam. Touch the button to view the removal method.
Clear
See pages 15-12, paper jam errors.
Point Description
The paper (Body) in transporting could not reach to the MM Tamper Eject Sensor from the MM Tamper Feed
3502
Sensor within the specifi ed time.
The paper (Body) in transporting could not reach to the MM Body Fold Entrance Sensor from the MM Tamper
3503
Eject Sensor within the specifi ed time.
The paper (Body) in transporting could not reach to the MM Wrapping Entrance Sensor from the MM Body
3504
Fold Entrance Sensor within the specifi ed time.
The paper (Body) in transporting could not reach to the MM Wrapping Stand-by Sensor from the MM Wrapping
3505
Entrance Sensor within the specifi ed time.
The paper in transporting could not reach to the MM Guide Sensor from the Paper ejection signal from the
3506
printer within the specifi ed time.
The paper (Form) in transporting could not reach to the MM Form Receive Sensor from the MM Guide Sensor
3507
within the specifi ed time.
The paper (Form) in transporting could not reach to the MM Form Registration Sensor from the MM Form
3508
Receive Sensor within the specifi ed time.
The paper (Form) in transporting could not reach to the MM Wrapping Sensor from [MM Form Registration
3509
Motor ON] within the specifi ed time.
The paper (Form) in transporting could not reach to the MM Gluing Sensor from the MM Wrapping Sensor
3510
within the specifi ed time.
The paper (Form) in transporting could not reach to the MM Flap Gluing Eject Sensor from the MM Gluing
3511
Sensor within the specifi ed time.
The paper (Form) in transporting could not reach to the MM Compile Eject Sensor from the MM Flap Gluing
3512
Eject Sensor within the specifi ed time.
The paper (Form) in transporting could not reach to the MM Eject Elevation Exit Sensor from the MM Compile
3513
Eject Sensor within the specifi ed time.
3514
The paper (Body) could not pass the MM Guide Sensor within the specifi ed time.
3515 The paper (Form) could not pass the MM Guide Sensor within the specifi ed time.
3516
The paper (Form) could not pass the MM Wrapping Sensor within the specifi ed time.
3517
The paper (Form) could not pass the MM Compile Eject Sensor within the specifi ed time.
3519
A paper remains ON the MM Guide Sensor.
3520 A paper remains ON the MM Body Fold Entrance Sensor.
3521
A paper remains ON the MM Top Tamper Sensor.
3522
A paper remains ON the MM Tamper Eject Sensor.
3523 A paper remains ON the MM Wrapping Entrance Sensor.
3524
A paper remains ON the MM Wrapping Stand-by Sensor.
3525
A paper remains ON the MM Form Receive Sensor.
3526
A paper remains ON the MM Form Registration Sensor.
3527 A paper remains ON the MM Wrapping Sensor.
3528
A paper remains ON the MM Gluing Sensor.
3529
A paper remains ON the MM Flap Gluing Eject Sensor.
3530 A paper remains ON the MM Compile Eject Sensor.
3531 A paper remains ON the MM Eject Sensor.
3532
The paper (Body) was transported to wrong path (Form paper).
3533
The paper (Form) could not move left and right at the switching point, because of paper skewed.
3537 A paper remains ON the MM Flap Entrance Sensor.
3653
A paper remains ON the MM Eject Elevation Edge Sensor when starts feeding.
3654
Failed to detect edge of the form within the specifi c time.
[ 15-88 ]