Riso ComColor X1 series Technical Manual page 742

Hide thumbs Also See for ComColor X1 series:

Table of Contents

9. Remove the two Ejection Guide Assist Spring from the shaft.

10. Remove the Swing Shaft Assembly by sliding the shaft to the rear and clearing the Spring Pin out through the

front frame of the unit.

(Match the shape of the hole and the spring pin.)

Caution in Assembly:

Insert the side pins on the white plastic pieces on the shaft into the vertical slit on the Ejection Roller Assembly.

Ejection Guide Assist Springs

Swing Shaft Assembly

Face Down Offset Stapler

Chapters

Table of Contents